The 8x8 HDMI matrix access to eight HDMI sinks, using eight HDMI sources. The matrix allows eight HDMI devices to be switched or split easily to eight HDMI compatible monitors or projectors. The Matrix can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.
Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
Eight HDMI 1.3 input signals switched or split to eight HDMI 1.3 sink devices.
HDMI Rev 1.3b compliant.
HDCP 1.2 protocol compliant.
Support CEC.
Support deep color 30bit, 36bit.
Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
Support signal retiming.
Support input up to 10 metres AWG26 HDMI 1.3 standard cable length, output up to 20
metres AWG26 cable length.
Inputs can be switched with the IR remote control, also can be controlled by eight buttons.
With RS-232 remote control, the device can update software and switch the inputs to outputs with PC.
l With leds, the status of the inputs and outputs can be easily displayed. If any source or any sink is effectively connected, the relative led will be lit.
With seven-segment digital tube, the user can well know the relationship between the inputs and outputs.
It can smartly jump over those input sources which are not connected.
With the smart function of memory, it can come back to the latest status when restarted
or reconnected.
No loss of quality
Installs in minutes
Need DC24V/3A power supply
RS-232 INTERFACE
Binary Table
|
ASCII
|
Select output
|
Note
|
|
1
|
A
|
For example: the input from 1 to input 8,all have been connected. If serial port communication inputs Capital A, then the A output will output the 1-8 circulatedly, the serial port adjust interface will show A=(1-8).
|
|
2
|
B
|
|
|
3
|
C
|
|
|
4
|
D
|
|
|
5
|
E
|
|
|
6
|
F
|
|
|
7
|
G
|
|
|
8
|
H
|
Receive
Transmit
GND
RS-232 Setting:
Baud rate .....................9600
Data bits ................................................................................... ..........8
Parity ...................................................... ......................................... None
Stop bits ..................................................................................................1
CRC bits…………………………………………………………………………None
Flow Control ................................................................................ None
SPECIFICATIONS: HDMX0808
HDMI version……………………………………………………………………………HDMI 1.3b
HDCP version…………………………………………………………………………....HDCP1.2
HDMI resolution ……………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support video color format ……………………………….24bit/deep color 30bit,36bit
Support audio format………………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max transmission bandwidth……………………………………………..6.75Gbps
Input/Output TMDS signal …………………………………… 0.5~1.5Volts p-p
Input/Output DDC signal ……………………………………………… 5Volts p-p (TTL)
Input cable distance……………………………………≤15m HDMI AWG26
Output cable distance…………………………≤20m AWG26 HDMI 1.3 standard cable
Max working current…………………………………………………………………………...2.0A
Power adapter format………………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC24V/3A
Operating temperature range……………………………………… (-15 to +55℃)
Operating humidity range……………………………5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………………………………507*259*88 (mm)
Weight………………………………………………………………………6000g
FRONT PANEL AND REAR PANEL DIAGRAM
The front panel of the device shows as figure 1, including power input indicator led, IR receiver, eight seven-segment digital tube, eight input indicator leds ,eight output indicator leds, eight output switch buttons, one reset button.
Figure 1: FRONT PANEL
The rear panel of the device shows as figure 2, including power input interface, RS-232 interface, eight HDMI input interfaces and eight HDMI output interfaces.
Figure 2: REAR PANEL
IR REMOTE CONTROL PANEL
The IR remote control panel shows as figure 3, including eight input buttons and eight output buttons. The left are numerical input channels. The right are alphabetic output channels.
Figure 3: IR REMOTE CONTROL PANEL
CONNECTING AND OPERATING
1 Connect one cable from each HDMI source devices into HDMI Matrix inputs.
1. Connect one cable from each display (monitor or projector) into the HDMI Matrix outputs.
2. Connect 24V power supply to the HDMI 8x8 Matrix.
3. Push the buttons on front panel, the user can switch the inputs to output channel relative to the buttons.
4. Use the IR remote control panel, the user can switch the inputs to output channel relative to the buttons. The Arabic numerals left are eight input channels and the English letters right are eight output channels. First, the user pushes the right button labeled English letter, selecting the output channel. Second, the user pushes the left Arabic numeral, selecting the input channel. Now the output channel and input channel selected are connected.
6．How to use the button to switch?
As shows in figure following, button labeled A indicates the output 1 channel and the input channel connected is in1.The output B channel is connected with the input channel in2, and so on. Push the button, the input will be sent to corresponding output port labeled English letter same as the button orderly.
7．How to use the IR remote control panel to switch?
As shows in figure following, push the button right labeled English letter, then push the button left labeled Arabic numeral. The selected output and input will be connected. For example one, the button labeled D pushed first and the button labeled 6 pushed second, the input in6 will be sent to output 4 relative to button D. For example two, if the user pushes the button B,and pushes the button 3 subsequently, the in3 will be sent to output 2.
8．How to use RS-232 interface?
The RS-232 can be used to update software and to monitor the status of the inputs and outputs. Also it can be used to switch the inputs to outputs. Connected with PC, the user can control the device easily and comfortably sitting in front of PC. The connection with PC and detailed function are described in RS-232 INTERFACE.
Handling Precautions: If reconnect and power again when the matrix is working well, you are advised to press the reset button to restart the work.
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. Pls turn the power off when the machines is not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adptor.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
|
Serial NO
|
Trouble Description
|
Cause and Ways to deal with
|
|
1
|
Non-Power-Connencted
|
1, Check if the power adaptor head is truly and correctly inserted the power socket.
2, Check the power switch if it is in on status.
|
|
2
|
No Picture
|
1, Pls to make sure that the TV is on and has been connected with the machine,.
2, To check if the signal source is on and well connected.
3, Check the system connection quality.
4, Check if the line is all good quality.
5, Check the cable quality( to see if the cable is compliant with the HDMI V 1.3..
|
|
3
|
Obscure Picture
|
1, To try again to connect the cable to be free from the unsuccessful connection.
2, HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.3)
|
|
4
|
Remote
|
1, Pls check if the film that stops the current has been taken out.
2, To check if the remote battery is working full.
|