Foot Grounders Safely remove static charges from workers to protect your ESD susceptible products.

• Per ANSI/ESD S20.20, use with ESD Floor " as a grounding alternative to the wrist strap system for standing operations"
• All our Foot Grounders are a suitable ESD footwear component in your Flooring-Footwear System as the primary grounding method(< 3.5 x 107 ohms per ESD STM97.1)
• Integral Current-Limiting Resistor for enhanced operator safety
• Available with 1megohm, 1.5megohm, 2megohm resistors; OSHA recommends a minimum of 1 megohm resistance to ground (RTG)
• Exceptionally long-lasting, durable premium rubber with tear resistant inner scrim and dual wear surface to double its life

Material Key:

• 0.070' ' thick, 1.5'' width, three layer laminated, rubber sole. White Color inner layer is insulative
• styrene-butadiene-rubber. Outer black colored layer is conductive styrene-butadiene rubber.
• Burgundy, grounding polyester ribbon tab, 18' ' /30' ' long with 8 conductive nylon strands, two-sided reversible, maybe positioned on either side of foot.
• A 1/4 watt, 1 meg ohm, 1.5megohm or 2megohm resistor are possible
• No Silicone is used in the materials that make our foot grounders

Heel grounder drain the static charges that can disrupt your operation