1. Product Description

Vibrating thermoplastic road marking paint is consists of thermoplastic resin, modified rubber, colored aggregate, special filler and other substances. With excellent visibility and good vibration performance, it is widely applied to mark the centre line of road, side line of highway, speed-down line at the entrance and exit of roads and etc.

 

2. Product Features

1)     Excellent visibility Benefited from the special formulation, it has good retroreflectivity performance to enhanced wet night visibility.  

2)     Good vibration performance when the vehicle is driven to get over the marked line, it makes vehicle slightly vibration to shake the driver to pay attention to safety.

3)     High-compression deformation, resistance to shock, vibration, abrasion, dry quickly, rainy night reflective and three-dimensional reflective visual effects, can be used for any road

 

3. Technical specification
Density: 1.8 ~ 2.3g/cm³
Softening point: 100 ~ 125 ℃
Construction temperature: 200 ℃ ± 30 ℃
Drying time: ≤ 6min
Compressive strength (23 ℃): 15mpa
Wear resistance: ≤ 50
Water resistance: 24 hours immersion in water should be no abnormal
Glass Bead Content: 18 ~ 25%
Color: white and yellow
Packing: 25kg plastic woven bag coated.

4. Note

1)     The construction ambient temperature 5 ℃ ~ 38 ℃, construction temperature 170 ℃ ~ 230 ℃, if the weather is hot, you can spray water on the surface of the coating after construction in order to achieve a cooling effect.

2)     Raised block shapes, sizes and spacing in accordance with road conditions, speed limits, use the best set various conditions.

3)     Construction workers during the operation to be adjusted according to the characteristics of the construction speed of paint to achieve the best molding results.
 

5. Application
Road edge line, slow line, ramp line, urban road center line, warning against lines marking.