Technical Parameters of Automatic EPS Block Molding Machine:
Model: ABE-ZK8000CV
Mould size: 8110*1230*630mm
Mould volume: 6.28m3
Products density/Proportion: 6-40 kg/m3
Production capacity: 4-12 block/h
Steam pressure: 0.6Mpa
Steam inlet DN: 150mm
Air-compressed inlet DN: 65mm
Power: 30kw
Supply voltage: 380V
Control mode: automatic
Structural features: Hydraulic Sliding-door Vacuum Cooling
Control system: PLC with Touch Screen
Max. Contour Size: 16000*3000*3000mm
Machine weight: 13 tons
Automatic feeding device: optional
Electronic weight: optional
Printing: optional
Main Features of EPS Block Molding Machine:
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished;
2. The Automatic Vacuum Control System does the feeding, heating, heat preservation and cooling;
3. The Vacuum System consists of the Vacuum Storage Tank, Vacuum Condensate Tank, and highly efficient water-recycling vacuum pump;
4. The machine is coupled by using high quality welding method, and to get rid of the rust, polishing, smoothing and aging treament, which gives the machine high strength, and without deformation. The density of the EPS Block can reach 6-40kg/m3, with fast EPS Block forming speed, uniform bonding, low moisture content, and with very minor deformation;
5. Applying a special Teflon coating to the surface of the mould cavity (Optional) makes the EPS Block to be easily ejected or released out of the mould;
6. The thickened wall Vacuum EPS Block Forming Machine has Automatic Conveyer, Automatic Electronic Weighing Scale, and the Automatic Printer;
7. This machine can be used to produce the width of 850mm, 950mm and 1150mm EPS Blocks, and also produce the width of 1000mm EPS Block for buildings;