Accelerometer, also known as Acceleration Sensor, is used to measure the force of
the accelerated motion. Usually it is represented with the relative ratio of the acceleration of gravity(G). The accelerometers designed by Xi’an ChinaStar M&C Limited Company which combined with the industry-leading iMEMS technology have the characteristic of high stability, small size, low weight, instantaneous startup, etc. They can be used vibration measurement and static acclivitous angle measurement.
the accelerated motion. Usually it is represented with the relative ratio of the acceleration of gravity(G). The accelerometers designed by Xi’an ChinaStar M&C Limited Company which combined with the industry-leading iMEMS technology have the characteristic of high stability, small size, low weight, instantaneous startup, etc. They can be used vibration measurement and static acclivitous angle measurement.
There are three series accelerometer products including CS-LAS series(uniaxial), the CS-2LAS series(dual axis) and the CS-3LAS series(triaxial). They can provide wide variety applications such as vehicle control, earthquake detect, petroleum reconnoitre, vibration measurement and acclivitous angle measurement.
Power
Input Voltage (VDC) 5±0.05
Input Current (mA) ≤2
Performance
Measurement Range (g) ±2 (here means both the x axis and the y axis,the same below)
Non-Linearity(%FS) ≤0.5
Bias Voltage (V) 2.5±0.1
Bias Drift (mg/℃) 0.1
Resolution (mg) ≤5 ≤1
Bandwidth (Hz) ≥50
Start-up Time (s) ＜1
Environmental Characteristics
Operating Temperature (℃) -40～+85
Shock Survivability (g) 4000 (0.5ms)
Size&Weight
Weight (g) 20
Size(mm) 18.8*12.7*8.4