The 3D wire mesh panel machine is the main machine of the 3D panel production line, which adopts PLC control system, air cylinder or step motor as drive. It can insert, cut, and control the position of wire mesh and EPS board automatically to complete the production of the 3D panel. 3D wire mesh welding line for the production of reinforcement 3D mesh panels.
This production line is with high automatic manufacturing level, productive efficiency, low lack welding rate, strong welding pressure and strength. The finished products(3D panels) are in excellent quality and low cost.
Technical Specifications:
Longitudinal wire diameter: 2.5-4 mm
Cross wire diameter: 2.5-4 mm
Maximum number of longitudinal wires: 25
Step between longitudinal wires: 50 mm maybe could be variable5mm-10mm
Step between cross wires: 50 mm maybe could be variable 5mm-10mm
Mesh width: 550 mm-1250 mm
Mesh length: 1000 - 6000 mm
Welding speed: 60 x 25 welding strokes/min , about 10 pcs/hour
Diagonal wire diameter: 3 mm
Quantity of diagonal wires: mode 1 = 100 per sqm and mode 2 = 50 per sqm
Distance between the two mesh sheets : 50 - 150 mm(Panel)
Minimum length of panel: 2000 mm
Maximum length of panel: 6000 mm
Average output based on one 8h shift per day : 240 sqm/h 3D PANELS
with truss steps of 100 mm
Controls : At your specification
Electrical power supply : 440 V AC - 3 phases - 50 cycles