Special Welding Equipment for Full Welded Ball Valve
Introduction
The scope of applicable valve body diameter for this equipment is large, the working efficiency is very high. This equipment can greatly improve the automation of ball valve welding.
Due to the particularity of the workpiece, (the special temperature requirements of inside plastic seal), in order to meet the requirement of not to damage the inside plastic seal, we use the micro wire submerged arc welding to reduce the heat input and the crevasse.
The available welding seam width is 12mm to 22mm, available wire diameter is Φ1.2mm to Φ2.0 mm.
This welding mode can deslag automatically, also can improve working efficiency and reduce labor intensity.
Main Techinical Data
|
Gantry
|
|
|
Voltage
|
Three phase 50HZ AC380V
|
|
Gantry span
|
3200x2800mm
|
|
Welder
|
|
|
Voltage
|
Three phase 50HZ AC380V
|
|
Effective crosswise travel of torch
|
≤3000mm
|
|
Lifting stroke of the welding torch
|
≤1800mm
|
|
Distance between welding torches
|
150mm -- 1500mm
|
|
Speed of crosswise travel
|
100-2000mm/min
|
|
Speed of lifting
|
100-2000mm/min
|
|
Welding speed
|
100-1500mm/min
|
|
Angle regulating of the welding torches
|
±45°
|
|
Turning rolls
|
|
|
Bearing
|
According to the actual situation
|
|
Roll linear speed
|
70-1200 mm/min
|
|
Roll rotational speed accuracy
|
5%
|
|
Roll diameter
|
According to the actual situation
|
|
Voltage
|
AC380V
|
For more details, please feel free to contact with me!