| Process: | |||||
| ERW(Electric Resistance Welded) | |||||
| HFI (High Frequency Induction) | |||||
| EFW(ELECTRIC FUSION WELDED TUBE) | |||||
| LSAW (Longitudinal Submerge-arc Welded) UO(UOE), RB(RBE), JCO(JCOE) | |||||
| DSAW (Double Submerged arc welded) | |||||
| Quality Standard: | |||||
| ERW HFI , EFW, LSAW, DSAW: : | |||||
| GB/T3091 Welded steel pipe for low pressure liquid delivery | |||||
| GB/T9711 Petroleum and natural gas industries--Steel pipe for pipelines | |||||
| IS: 3589 Steel tubes for water and sewage | |||||
| IS : 1978-1982 Steel tubes for use in transportation of oil; gas & Petroleum products | |||||
| BS: 1387 Steel Tubes for use for Water, Gas, Air and Steam | |||||
| ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | |||||
| EN10217 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties | |||||
| API 5L Line Pipe | |||||
| DIN 2440, DIN 2441, DIN 1626, EN10240 | |||||
| DIN 2458 WELDED STEEL PIPES AND TUBES | |||||
| Material : | |||||
| DIN17100(EN10025)/EN10217: ST33, ST37.2, ST44.2, St12, St13, St14, St44, ST52, FE360 | |||||
| ASTM A 53: Gr. A, Gr B | |||||
| API 5L : GR. A, B, X42, X46, X52, X56, X60, X65 X70 | |||||
| Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8 | |||||
| S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, | |||||
| GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555 | |||||
| Outer Diameter: 6mm-610mm (1/16" -24" ) | |||||
| Wall Thickness: 0.3mm-22mm | |||||
| Length: 0.5mtr-20mtr | |||||
| LSAW, DSAW: | |||||
| Outer Diameter: 219mm-1820mm | |||||
| Wall Thickness: 5.0mm-50mm | |||||
| Length: 6mtr-18mtr | |||||
| Pipe End: Plain, beveled, threaded and coupled(Threading as per BS1387, ASTM A53) | |||||
| Pipe surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) | |||||
| Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps. | |||||
| Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior | |||||
| Size Inspection, Hydrostatic Test, X-ray Test. | |||||
| Mill Test Certificate: EN 10204/3.1B | |||||
| Third party inspection: SGS, BV, Lloyds etc. | |||||
