Rotary Roller Dryer
1.reliable quality,
2.energy saving,
3.stable operation,
4.durable using,
Rotary Roller Dryer Works Theory
Mainly by the rotary drum dryer body, lifting plate, gear, support equipment and seals and other components. Dry and wet material from the belt conveyor or bucket elevator to the hopper, and then by the hopper feeder feeding through the feeding tube into the side. Slope of the pipe feeding the natural inclination to be greater than the material in order to smooth the material into the dryer. Dryer cylinder into a slightly tilted to the horizontal rotating cylinder. Adding material from the higher end, low-end entry by the heat carrier, and the material into a counter-current contact, but also heat carrier and the material together and flow into the cylinder. With the drum material by gravity to run to one end than at the end. Wet material in the cylinder body to move forward the process, directly or indirectly to the body containing the hot heat, the wet material to dry, then the discharge end by the belt conveyor or screw conveyor sent.
Rotary Roller Dryer Features
1. Machine lifting plate and angle distribution of rational design, reliable performance, and therefore high thermal efficiency, uniform drying, cleaning materials, the number of small, suitable and convenient maintenance.
2. Device structure by aligning type tugs, tugs and rolling circle with the good, greatly reduce the wear and power consumption.
3. The block device specially designed wheel structure, greatly reduces the work due to equipment caused by tilting the level of thrust. Strong resistance to overload, cylinder smooth operation and high reliability.
4. Dryers with high temperature characteristics, high temperature hot air to use the materials for quick drying. Scalable capacity, design considerations of the production margin, even a small increase in production, but also need to replace equipment.
5.Roller dryer large capacity, fuel consumption, dry and low cost.
The Main Technical Parameters of Rotary Roller Dryer
|
Type
(mm)
|
Gradient (%)
|
Rotate Speed(r/min)
|
Inlet Temperature (°C)
|
Power
(Kw)
|
Volume
(m3)
|
Output(t/h)
|
Weight
(t)
|
|
Φ600×6000
|
3-5
|
3-8
|
≤700
|
3
|
1.69
|
0.5-1.5
|
2.9
|
|
Φ800×8000
|
3-5
|
3-8
|
≤700
|
4
|
4.01
|
0.8-2.0
|
3.5
|
|
Φ800×10000
|
3-5
|
3-8
|
≤700
|
4
|
5.02
|
0.8-2.5
|
4.5
|
|
Φ1000×10000
|
3-5
|
3-8
|
≤700
|
5.5
|
7.85
|
1.0-3.5
|
5.6
|
|
Φ1200×10000
|
3-5
|
3-8
|
≤700
|
7.5
|
11.30
|
1.8-5
|
14.5
|
|
Φ1200×12000
|
3-5
|
3-8
|
≤700
|
11
|
13.56
|
2-6
|
14.8
|
|
Φ1500×12000
|
3-5
|
2-6
|
≤800
|
15
|
21.19
|
3.5-9
|
17.8
|
|
Φ1800×12000
|
3-5
|
2-6
|
≤800
|
18
|
30.52
|
5-12
|
25
|
|
Φ2200×12000
|
3-5
|
1.5-6
|
≤800
|
18.5
|
45.59
|
6-15
|
33
|
|
Φ2200×18000
|
3-5
|
1.5-6
|
≤800
|
22
|
68.38
|
10-18
|
53.8
|
|
Φ2200×20000
|
3-5
|
1.5-6
|
≤800
|
30
|
75.98
|
12-20
|
56
|
|
Φ2400×20000
|
3-5
|
1.5-5
|
≤800
|
37
|
90.43
|
18-30
|
60
|
|
Φ3000×20000
|
3-5
|
1.5-5
|
≤800
|
55
|
141.3
|
25-35
|
78
|
|
Φ3000×25000
|
3-5
|
1.5-5
|
≤800
|
75
|
176.6
|
32-40
|
104.9
|