NAIL MICRO CIRCULATION SCOPE 05 Manaul
II. OPERATION
1. Put a finger on the finger stage, rotate the finger stage until the finger comfort, then put the plant oil ( peanut oil etc) drip down the skin of the edge of nail, wait a second, when plant oil besprinkle whole the skin of the edge of nail equably, adjust cross/lengthwise knob make the observation part into enter of optical axis
2. Checking-gause is Coaxial coarse/fine focusing system, firstly adjust coarse focusing know, until show edge of nail image of microcirculation blood vessel contour in the monitor, then adjust fine focusing knob until the image to be clear
3. If image brightness not bright, rotate the light control to make the image brightness until you satisfaction
4. Loosening Holding screw of lamp seat or rotating Angle of illumination adjustment know to adjust illumination angle to illumination angle of illumination when image appear the oil glisten. If its doesn’t well, loosening Holding screw of illumination to adjust illumination angle of illumination height and angle until getting satisfaction illuminate effect .
III. MAINTENANCE
1. Sweep the lens
Sweep the lens by lens tissue or soft fabric immersed with mixed liquid of alcohol/ether or diethyl benzene. Cleaning the oil on the 100x objective whenever finish operating
2. Clean the painted parts
The dust on the painted parts can be removed by gauze, for the grease spots, the gauze immersed slightly with aviation gasoline is recommended. DO not use organic solvents such as alcohol , ether or other thinner etc, for cleaning the pointed parts or plastic components.
3. Avoid disassembling the microscope
Being a precise instrument, do not disassemble the microscope casually that may cause serious damage to its performance
4. Being net used
Cover the microscope with polymethy1 methacrylate or polyethylene and places where there is dry and modules, Suggest that storage all objectives and eyepieces in closed container with drying agent