Main Technique Parameters:
|
Max. Push & Pull Force : 1430KN
|
Max. Torque : 55000N. m
|
|
Max. Push & Pull Speed: 18m/min
|
Max. Rotary Speed : 0～80 r/min
|
|
Engine Power: 2× 145 KW
|
Walking Speed of Caterpillar: 3Km/h
|
|
Entry Drill Angle : 8～18°
|
Max. Climbable Gradient : 20°
|
|
Drill Rod : ф127× 9600mm
|
The Crane on the Machine : 2T
|
|
Max. Diameter of Expanding Aperture: 1800mm(Soil Dependent)
|
Max. Distance of Construction: 1500m(Soil Dependent)
|
5000× 600 Walking Caterpillar
Deutz Engine: Deutz 145KW 2 sets
The hydraulic systems adopt the close circuit: Adjustable axial piston pump adopts close circuit from American Sauer Company; the hydraulic motor and loop flushing valve from Italian Sam Company OR American Sauer Company; imported rubber pipes with big diameter; joint of hydraulic pipes from American EATON Company.
Adjustable axial piston open-circuit pump from American Sauer Company controls clipping and assistant mechanisms.
The original speed reducers are imported from Italian DINAMIL OIL SPA
Alloy steel rack and pinion with big modulus
Proportional Control Valve is imported from American Sauer Company
It could be used for wire controlled directional guiding system mechanism
Walking system is controlled by wire.
It is equipped with 2 ton crane.
The main technique parameters, mani equipments and main performance characteristics will be sent as you require.