Auto HID Ballast
Input voltage: 8.5--18V DC
Rated voltage: 13.2V DC
Working electric current: 3.5A
Start the maximum current: 7A start: 1 second to reach 20% brightness, 4 seconds to reach the rated brightness.
Input voltage: 8.5--18V DC
Rated voltage: 13.2V DC
Working electric current: 3.5A
Start the maximum current: 7A start: 1 second to reach 20% brightness, 4 seconds to reach the rated brightness.
Waterproof: Meet the DIN 40050 regulations and standards;
Dust: Meet SAE J575 standards and regulations;
Earthquake: Meet the DIN 40046 regulation standard.
Ambient temperature: -40 degree celsius ---- +105degree celsius
Life: 3000 hours, the light fades <20% of the continuous life of flash frequency: More than 100, 000 times
Constant power: 35 ± 1W, the total power consumption <40W will not be different brands of lamps or the aging of the lamp will produce different effects differences pipe pressure, its output power remains the same, to protect the ballast and bulbs life.
Under-voltage protection:
In order to prevent the car battery to power light bulbs will all run out, causing car not start, when the car's battery voltage is below 8V, the ballast automatically shut down to stop working.
Over-voltage protection:
In order to prevent burning bulb when the voltage is too high and the burning of other vehicle equipment and vehicle to vehicle owners immediately find fault, when the vehicle's power supply system and battery failure, the voltage above 18V, the ballast automatically shut down to stop working.
Output short circuit open circuit protection:
When an accident or short circuit, open circuit occurs, the ballast immediately cut off circuit to prevent the risk of electric shock or detonation of fuel tanks, to ensure safety.
Power Polarity ID:
The input power jack marked with "+""-" easy installer correctly connect the power, but also to facilitate its maintenance.
Reverse Protection:
When the power of "+""-" reversed polarity, the ballast will not suffer damage, to ensure that ballast safety
Dust: Meet SAE J575 standards and regulations;
Earthquake: Meet the DIN 40046 regulation standard.
Ambient temperature: -40 degree celsius ---- +105degree celsius
Life: 3000 hours, the light fades <20% of the continuous life of flash frequency: More than 100, 000 times
Constant power: 35 ± 1W, the total power consumption <40W will not be different brands of lamps or the aging of the lamp will produce different effects differences pipe pressure, its output power remains the same, to protect the ballast and bulbs life.
Under-voltage protection:
In order to prevent the car battery to power light bulbs will all run out, causing car not start, when the car's battery voltage is below 8V, the ballast automatically shut down to stop working.
Over-voltage protection:
In order to prevent burning bulb when the voltage is too high and the burning of other vehicle equipment and vehicle to vehicle owners immediately find fault, when the vehicle's power supply system and battery failure, the voltage above 18V, the ballast automatically shut down to stop working.
Output short circuit open circuit protection:
When an accident or short circuit, open circuit occurs, the ballast immediately cut off circuit to prevent the risk of electric shock or detonation of fuel tanks, to ensure safety.
Power Polarity ID:
The input power jack marked with "+""-" easy installer correctly connect the power, but also to facilitate its maintenance.
Reverse Protection:
When the power of "+""-" reversed polarity, the ballast will not suffer damage, to ensure that ballast safety