Printed Circuit Board

Country of Origin: China (mainland)

· Vendor to be UL recognized to minimum category of 94V0

· Fabricated in accordance with IPC_A_600, latest version unless otherwise specified in attached specification.

· All patterns according to Customer PCB Artwork/Film/Gerber File.

· Material: FR_4 other

· We would provide a copy of UL materials certificate.

· Weight of Copper: 1 oz per sq . Ft(Base Material)for Outer Layers. Finish to be 2oz per sq. Ft oz per sq. Ft(Base Material)for Inner Layers.

· Finished Board thickness shall be(Tolerance is ± 10%): 0.8mm 1.0mm 1.2mm 1.6mm Other

· Finishing according to IPC_TM_650(2.2.13)latest version.

· Via Method: PTH NPTH Blind Via between layer

· PCB must be identified with MFR’ S approval logo, type designation week and year(WWYY) OF MFR and Customer P

· MFR’ s UL Logo& indicated location According to PCB Drawing of Gerber data

· Date code location: Print on Top/Bottom Side Silkscreen Layer

· Etch on Top/Bottom Side Copper Layer.

· Customer Part No. & Silkscreen Layers According to PCB Drawing or Gerber data indicated location.

· All PCB will be electrical tested before shipment

· Other Test and Reliability standard refer to IPC_A_600(latest version)PCB Class1 Class2 Class 3

· As per ion_contamination test results. (IPC_TM_650 Test Method2.3.25)

· Finishing: HAL ENTEK Pre_flux Gold Flash Gold Plating Immersion Tin Immersion Silver Immersion gold

· Min. Hole size: 12mil or mm(Remark: The minimum hole size are for drill bit size)

· Legend Silkscreen: Top or Bottom side

· Legend marking do not allow printed on soldering pad and must keep clearance 10 mil min, leave to the soldering pad

· Silkscreen color: White Yellow Black

· We will provide specification & Materail Safety Data Sheet(MSDS) of legend ink

· Soldermask: Wet film Dry film Conventional Peelable

· Plug all via holes by soldermask on Top Side or Bottom Side

· Soldermask color: Green Blue Yellow Red Other

· Fabrication: Routing Punching Handmade

· All sample board and risk buy order will be acceptable for routing

· PCB Unit/Panel size: 163.3X215.6inch/mm

· Comply RoHS standard

· Packing: handwork package
Inner packing: vacuum package
Outer packing: carton

· Pattern Comparison : All patterns according to PCB Artwork/Film/Gerber File.

· Trace & Space Width Within ± 20% per artwork.

· Conductor Nicks, scratches or pinholes < 20% of nominal width

· E_test Mark Must be present after Electrical Test.

We are pleased to supply the best quality PCB products for all custmers based on our company motto of best quality and service.