Product Main

Specifications

EPRC10-ST series is the second generation of the EPRC solar controller, it provide automatic lighting control function.
good for street and pathway lighting, parking area, bus station and signage and etc.

Features                                                                        
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation
Automatic detection of the voltage
External temperature sensor
Big terminals and big distance between terminals
Double digital LED display, numbers equal to timer setting
Electronic protection                                                            
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
Display                                                                          
4 LED indicators
PV: Green charging
Battery: Green Yellow Red
Load: Red output on
Red slow flashing& blinking shows mistakes
The fourth double LED shows timers
Technical specification

EPRC10-ST series:  12 VOLT or 12/24 VOLT auto work, 10 AMPS (for PV and load)

Equalization voltage:         14.8 Volt
Boost voltage:              14.4 Volt
Float voltage:              13.6 Volt
Low voltage disconnect (LVD)  11.10 Volt
Low voltages reconnect (LVR):  12.6Volt      
Temperature compensation:   -30mv/centigrade/12V
Self-consumption:           6mA maximum
Terminals:                  for wire sizes to 6mm2
Temperature:               -35 to +55

Notes: It is for 12V system. Please X2 for 24V system.