Plate Heat Exchanger consists of a set of corrugated plates on which there are four angular holes for the two kinds of liquid(gas)to pass through.
The metal plate are mounted in a frame which has a fixed plate and a movable keep plate on the sides, held together by fashening bolts.Sealing gaskets are mounted on the plate to seal the fluid channel and guide the fluid to flow into coorresponding channels in turn. The corrugated plates can not only enhance turbulence but also form sufficient supporting points to bear the pressure differece between the mediums.
The metal plates and the movable keep plate are hung on the upper leader and fixed by the lower leader.The ends of the leaders are fixed on supporting pillars.
The metal plate are mounted in a frame which has a fixed plate and a movable keep plate on the sides, held together by fashening bolts.Sealing gaskets are mounted on the plate to seal the fluid channel and guide the fluid to flow into coorresponding channels in turn. The corrugated plates can not only enhance turbulence but also form sufficient supporting points to bear the pressure differece between the mediums.
The metal plates and the movable keep plate are hung on the upper leader and fixed by the lower leader.The ends of the leaders are fixed on supporting pillars.
advantages and characteristics of HARE plate-type heat exchanger
1.high heat efficiency and low temperature difference at bottom
2.safe use and simple maintenance
3.glue-free application of gaskets
4.reasonable and efficient diverging area
5.low scale formation and low cost
6.diversified plate combination
7.different channel sizes in the same type
8.positioning and interlock structure at the four corners
9.five-point positioning system
10.one-way fastening rod system
|
Plate material
|
Applicable fluid
|
|
Stainless steel(AlSl304,AlSl316L)
|
Purified water, river water, edible oil, mineral oil
|
|
Titanium and Ti-Pd
|
Sea water, salt water, salt chemicals
|
|
20Cr, Rs-2, SMO254
|
Dilute sulphuric acid, dilute aqueous, solution of salt chemicals, lnorganic solution
|
|
Nickel
|
High temperature and high concentration of caustic soda
|
|
HASTELLOY (C276,D205,b2G) Alloy
|
Concentrated sulfuric acid,hydrochloric acid and phosphoric acid
|
|
Black lead
|
Hydrochloric acid,medium-concentration sulfuric acid,phosphoric acid and fluoric acid
|