1.The whole structure of the hydraulic press brake:
-Welded structure: the stress of the welded parts can be eliminated by vibration; so this forging press gives high accuracy.
-Frame: consist of right and left wall boards, working table, oil box, slot steel and etc., with high strength
-This type of metal machining tool is a kind of steel torsion bar synchro press brake. Electronic control of back gauge and ram stroke, data displayed and manual setting.
-Optional accessories: Esturn E10 counter, pendant-control-box German Herbiger valves or Italy Aron valves light curtain ball screw and linear guide of back gauge tooling clamping device.
-Slide synchro system: adopt steel torsion bar synchro system, with high synchro precision. There are 2 synchro forks at the both ends of slide, making the movement effect balanced during operation. Brake precision is improved due to the use of upper die compensation.
-Process of cylinder and sealing component:
Cylinder: no.45# steel treated, inner holes fine machined and extruded.
Valve rods: no.45# steel treated, nickel and phosphorous coated outside.

2.Hydraulic system:
- Adopt integrated hydraulic control system, more reliable
-Consist of motor, oil pump and valve groups
- Be installed at the top of the oil box, which can assure that the cylinder is always full of oil when the slide is moving down at high speed
-Complete working cycle can be realized through the control of hydraulic valve.
-The working pressure at the right side of the wall board can be adjusted by the remote adjustment valve

3. Components
- The main sealing components of the cylinder are imported products.
- Main electric components: From French schneider.
- Hydraulic valves are from Shanghai hydraulic parts No. 1 plant
-Oil pumps are from Shangshi hydraulic parts No. 3 plant.
-NOK sealing components