Digital thermal lamination film, Gloss
Digital thermal lamination film, which is high adhesion and more stick on digital laminating, specially use for digital printing materials.
It is suit for the digital printer using electro ink, XEROX DC series, HP Indigo series, CANON digital printer, and so on, for example, XEROX DocuColor 8000/5000 and HP Indigo Press 7000.
Digital thermal lamination film, which is high adhesion and more stick on digital laminating, specially use for digital printing materials.
It is suit for the digital printer using electro ink, XEROX DC series, HP Indigo series, CANON digital printer, and so on, for example, XEROX DocuColor 8000/5000 and HP Indigo Press 7000.
SPECIFICATION
Specification
Thickness: 24~250mic
Width: 100~1880mm, Length: 200~3000m
Paper core: 25.4mm(1 inch), 58mm(2.25 inches), 76mm(3 inches)
Bonding: less than 2
Thickness: 24~250mic
Width: 100~1880mm, Length: 200~3000m
Paper core: 25.4mm(1 inch), 58mm(2.25 inches), 76mm(3 inches)
Bonding: less than 2
Process parameter:
Equipment for thermal film: dry and wet film laminator
Lamination temperature:
Normal: 85~100℃
Special: 100~110℃
Roller pressure: 10-18Mpa
Speed: 8~20m/min
Remarks: Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper.
Equipment for thermal film: dry and wet film laminator
Lamination temperature:
Normal: 85~100℃
Special: 100~110℃
Roller pressure: 10-18Mpa
Speed: 8~20m/min
Remarks: Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper.
PRODUCT APPLICATION
Applications: top-grade presswork, outdoor advertisement, non-drying adhesive, tags, electric cable, electronic products.
Applications: top-grade presswork, outdoor advertisement, non-drying adhesive, tags, electric cable, electronic products.
APPLICATION MANUAL
1. Adjust roller pressure and temperature according to different types of paper and ink.
2. When using the film for the first time or changing to other sizes, we recommend a small trial volume before going into fully mass lamination.
3. The following situation will affect the quality of the film when laminating.
a. When using metal ink.
b. When the ink contains too much wax, dried oil, adhesive, and silicon additive. Etc.
c. When the ink is too thick.
d. When the ink is not completely dry.
e. When the paper contains too much moisture.
f. When there is too much powder.
1. Adjust roller pressure and temperature according to different types of paper and ink.
2. When using the film for the first time or changing to other sizes, we recommend a small trial volume before going into fully mass lamination.
3. The following situation will affect the quality of the film when laminating.
a. When using metal ink.
b. When the ink contains too much wax, dried oil, adhesive, and silicon additive. Etc.
c. When the ink is too thick.
d. When the ink is not completely dry.
e. When the paper contains too much moisture.
f. When there is too much powder.
Packing:
Rolling package (Upside and downside round plastic cover, outside board); Paper box (export specification), in pallet individual corrugated boxes, with core plugs both sides and foam or bubble wrap on the roll.
Storage
The product should be stored in a dry, well ventilated warehouse. To avoid direct sunlight, the product should not be stored in the open air.
Safe precautions
1. Be away from fire and heat sources.
2. Should not be stored or transported together with chemicals and inflammables.
3. Warehouse must be equipped with extinguishers or fire-fighting device.
Rolling package (Upside and downside round plastic cover, outside board); Paper box (export specification), in pallet individual corrugated boxes, with core plugs both sides and foam or bubble wrap on the roll.
Storage
The product should be stored in a dry, well ventilated warehouse. To avoid direct sunlight, the product should not be stored in the open air.
Safe precautions
1. Be away from fire and heat sources.
2. Should not be stored or transported together with chemicals and inflammables.
3. Warehouse must be equipped with extinguishers or fire-fighting device.