The Automatic Vacuum forming Machine can made the plastic enclosures,trays,sheets by the PVC PP PS APET ABS materials. it is widely used in the blister Package,like toy, hardware, food, electronic, accessories etc.
| standard specification: | |
|
Forming length
|
48’’(1220mm)
|
|
Forming width
|
28’’(710mm)
|
|
Forming height
|
about10’’(250mm, According to the different materials and mould, here is certain difference)
|
|
Production rate
|
Maximum : 6S/ module
|
|
Power of oven
|
Maximum :24KW
|
|
Power of motor
|
4.5KW
|
| Power of cool water | 3.75KW |
|
Vacuum pump
|
2.2KW
|
|
Compressor
|
15KW
|
|
Total power consumption
|
About 35KW(According to the material, mould vary)
|
|
Installed power
|
50KW(Including the air compressor)
|
|
Mechanistic dimensions
|
6900*1550*2500mm
|
|
Net weight
|
About 3200KG
|
The machine features of Automatic Vacuum forming Machine:
1, The machine adopts frequency Madara chip design;
2, the rodless cylinder slice machine design;
3, the machine vacuum valves with mechanical suction vacuum dual synchronous design;
4, the machine parts with hard chrome plated design;
5, the machine uses high ripple paint paint;
6, the machine The machine is sealed (hot oven doors installed);
7 installed on this machine positioning mode, positioning the use of electric regulation under;
8, the machine forming part of the installation of lighting;
9, the machine guides, manually sync adjustment;
10,it's Adopted stainless steel heat furnace, durability, better, special insulation design, better insulation properties furnace, heat loss is smaller, effectively save energy and reduce production costs.
11, pulls the film length to set the system, using advanced template-style control panel design, more intuitive than the traditional, more synchronized with the actual length that is set equal length;
12, the new vacuum control system is more flexible than traditional maintenance more convenient, less failure, longer life, faster response, forming an effective guarantee product quality.
11, pulls the film length to set the system, using advanced template-style control panel design, more intuitive than the traditional, more synchronized with the actual length that is set equal length;
12, the new vacuum control system is more flexible than traditional maintenance more convenient, less failure, longer life, faster response, forming an effective guarantee product quality.
Special features:
1: automatic tune updown-model 2: twice times up-model function 3:twice times down-model function
4: The functions of tow times blow 5:a vacuum function
6: fine-tune the Pneumatic components
7: Central lubrication system 8: Easy tune Middle brake 9: under-model tune same time 10: withdrawn from the furnace automatically
1:Vacuum Pump: The United States "AIRTECH" 100m3/hr 1 station (attached)
2:water cooler: "DONGJUN" 5HP 1 station (attached)