Product Main

Specifications

This Brick Machine is the patent product .Upper and lower stages use one electric motor with characteristic of compact structure , out view novelty ,energy saving and high efficiency ,high extruding pressure ,wide practicability and low investment .It is the ideal equipment of technological reform for middle and small sized enterprise s.

Specification Model        hroughput         power requirement      Exterrior Dimension(mm)

JKBL50/50-35          11000-15000(piece/hr)   Y6-160                   5260*1760*1950
JKRL45/45-25           10000-13000                     Y6-110                  5280*1700*1950
JKRL40/40-20            8000-11000                       Y6-90                     4580*1620*1700
JKRL35/35B-15          7000-9000                          y6-75                     4400*1550*1620

This  brick machine suitable for the production of high aperture rate hollow brick, high adulteration fly ash agglomeration.
 
Product characteristic:
This clay brick machine is an extruding and shaping device for hollow brick production line. It is suitable for hollow bricks with highly ratios hole,sintering bricks highly contained fly ash, low plastic glues soil brick, as well as the production of gangue and shale bricks.
Advantages:
1.It is suitable for producing Multi-hole bricks, hollow bricks and solid clay bricks with different size.
Multi-hole bricks:
 
12 holes hollow brick and  8 holes hollow brick
 
solid clay brick
 
  
2.Vacuum extruding and high extrusion pressure;
3.Lower moisture water content ;
4.Intensity of the green brick is greater;
5. High production capacity;
6. Little noise and longer serce life;
7. Advanced technology:
Quality control for the hardness of gearwheel. ( Identification of the technical quality of the machine is directly related to the quality of the machine) 
 
Heat Treating Technology:
 
wear-resistance metal spray painting technology:
 
Technical Parameters:
Type Type JKY50/50E-40
Production capacity (pcs/hr) 11000-15000
Equipped power (KW) Y6-55+160
Rotation speed of main shaft (R/M) 38/25
Dimension(mm)L*W*H Upper stage  4400*1000*1200
Lower stage  5280*1600*1570
Support Pillar 1900*1760*2100
Vacuum degree ≤ - 0.092
Extrusion Pressure (Mpa) ≥4.0
Moisture water content(%) 15~18
Plasticity index of raw material 7~15
Equipped vacuum pump(oil) H-200, Required power: 11kw
Net weight (ton) 17