OTF-1200X-LP-60 is a split tube furnace with 316 stainless steel tube (60mm O.D x 51 mm I.D x 1200 mm L) and flanges/valves. It is designed for using at 88 PSI (6 atm) high pressure up to 850oC under oxidizing and inert gas atmosphere to process special compound.
Furnace casing
|
Double layer steel casing with air cooling. Built in thermostat is able to control cooling system running automatically when case temp. > 55oC
|
Power
|
2.5 KW
|
Voltage
|
AC 208-240 Single Phase, 50/60 Hz
|
Max. Temperature
|
800 oC
|
Max. Heating Rate
|
<= 30 oC /min
|
Material and Size of Pressure Vessel
|
SS310S heat resistance Stainless Steel alloy
60mm O.D x 51 mm I.D x 1200 mm L
|
Heating Zone length
|
440 mm ( single zone )
|
Constant temperature
|
200 mm (+/-1oC)
|
Temperature controller
|
PID automatic control with 30 segments programmable
LED digital display with protection over temperature and thermal couple broken
|
Temperature Accuracy
|
+/ - 1 oC
|
Pressure control and Conflat Flange & Fitting
|
One digital pressure sensor installed on the tube flange and connect to LED display
You can use the Pressure controller to set the highest pressure alarm and furnace heating power will be cut-off automatically once pressure reach the alarm point.
Two stainless steel(316)flanges weld to tube with double high temperature copper O-ring.
Two Aluminum heat radiators are installed in front of flange to keep the temperature of flange below 100oC
Two high pressure valves.
316 Stainless Steel Conflat Flange with Oxygen Free Copper Gasket
Optional:we may install a electric feedthrough (4-16 pins )on one flange upon request at extra cost
|
Working Pressure vs temperature
|
Warning: Must limit Workign temperature under a certain pressure limited by vessel material strength
1800 PSI maxat 600 oC (124 bar )
750 PSI maxat 650oC(51 bar)
450 PSI maxat 700oC(31 bar)
150 PSI max.at 800 oC(10 bar )
Never heat up vessel above 800oC
This furnace also can achieved vacuum upto 1o-2 torr by mechanical pump and 10-4 torr by mecilar pump
|
Heating Element
|
Fe-Cr-Al Alloy doped by Mo
|
Dimension
|
550 x 380 x 520 mm
|
Net Weight
|
Tube:15kg; Body:25kg
|
Warranty
|
One year limited warranty (Consumable parts such as o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Shipping package size
after crating
|
45x45x35 inch
|
Shipping weight
|
200 lbs
|