PC Series High-Efficient Combined Crusher combines the functions of primary and secondary crushing, which can crush 450-1000 mm mineral stones into 5-8mm particles directly.
The PC Series crusher has created the history of producing cement by reducing 1/3 investment on the equipment and saving half of the power consumption as well as maintenance cost.
This series are widely used in mineral stones, cement, building materials and chemical industries for the materials with compressive strength less than 200 MPa, such as limestone, clinker, gypsum, coal, etc.
Features
1. The beating plates and impact plates can be adjusted, which can well control the output sizes.
2. The sieve plate is made of several pieces, which is more economical for maintenance.
3. The height of the sieve plate can be adjusted, the gap between the sieve and hammer heads can be adjusted after there is some wearing for the sieve plates, which can greatly improve the utilization rate of the sieve plate.
4. High reliability, low cost, economical investment , less energy consumption.
Model
|
Max. Feeding Size (mm)
|
Average Discharging Size (mm)
|
Capacity(t/h)
|
Motor Power (kw)
|
PC-40
|
<450
|
3~5
|
15-45
|
75
|
PC-60
|
<500
|
3~5
|
15-65
|
110
|
PC-80
|
<500
|
5~8
|
25-85
|
132
|
PC100
|
<600
|
5~8
|
60-110
|
185
|
PC-120
|
<600
|
5~8
|
70-130
|
200
|
PC-160
|
<700
|
5~8
|
80-180
|
250
|
PC-200
|
<700
|
5~8
|
130-220
|
280
|
PC-300
|
<1000
|
8~12
|
200~340
|
450
|
PC-400
|
<1000
|
8~12
|
200~420
|
560
|
PC-500
|
<1000
|
8~12
|
300~520
|
710
|
Note: Specifications are subject to change without further notice.