Automatic holllow block making machine, automatic block machine
chinese well-known trademark
1Heat treated mould
2ISO9001/CE/SGS
3Germany,Japan technology
4Full automatic style
(1)QT4-15C automatic hollow block machine production capacity
size(l*w*h) pcs/mould pcs/ hr pcs/ 8 hr
400*200*200 4 600-960 4800-7680
Dimension of host machine 3800×1800×2550mm
Host machine power 19.2 KW
Moulding area 400×800mm
Vibration force 40KN
Moulding period 1 5-25S
Mixer model JD500
The size of the pallet 1010×550×25/30mm
General water Consumption 4T/every day
Weight of the host machine 4.6T
Voltage 380V
(3).TECHNOLOGY OF Full-AUTOMATIC HOLLOW BLOCK MACHINE
1. QT4-15C Automatic hollow block making machine using Germany Siemens Motor, which is the best motor brand in the world. Its lifespan is 1.3 times than that of common motor.
2. QT4-15C Automatic hollow block making machine Japan Mitsubishi PLC control system and Omron travel switch, achieving dialogue and exchange between man and machine. Dozens of mechanical action of different products could be adjusted through the menu to select the addition and subtraction without needing professionals.
3.as a multi-purpose machine, exchangable mold can produce normal bricks, hollow bricks, multi-holes' bricks
4. QT4-15C Hollow block making machine scatter material through revolving 360 degree , this process likes to mix the material again after the mixer, the technology makes the blocks evenly and high density
5. QT4-15C Automatic block making machine mould got heat treatment and carburization, making the antiwear ability 1.2 times as the other mould
6. When pressing, the excess oil will be turned to Li Zhen-hit, and computer controlled directional vibration, frequency and brake to cancel the vibration energy
7. QT4-15C Automatic block making machine feeding in low-frequency, vibrating in high-frequency, and increasing in Head tanks. Table and Mould vibrating together will make concrete fully liquefied and exhausted in 2-3 seconds to achieve high-density and high strength ,Particularly be suitable for the production of high-strength blocks, you can stack immediately after forming
8. Hopper installed a swing-type cutting device, it can put the materials into the molding box uniformly by adjusting the swinging fork
9. Three small oil cylinders is our feature, which is different from other companies , the same cylinder can make the pressure on the block happen at the same time ,so get more tighter bricks