Block making machine, brick making machine, block machine, automatic concrete block machine, block making machine
chinese well-known trademark
1.ISO9001/CE/SGS
2.Absorb Germany technology
3.Automatic and efficiency
4.Better after service..
1.ISO9001/CE/SGS
2.Absorb Germany technology
3.Automatic and efficiency
4.Better after service..
(1).QT6-15A block making machine main technical parameters
Dimension of host machine 2650×2200×2780mm
Host machine power 32KW
Moulding area 800×600mm
Vibration force 45KN
Moulding period 15-20S
Capacity 78.25KVA
The size of the pallet 850×750×20/25mm
Mixer model JS500
Weight of the host machine 8.7T
General water Consumption 6T/every day
Voltage 380V
(2).Production capacity
Size(LxWxH) Pcs/Mould Pcs/ Hr Pcs/ 8 Hr
400X200X200 6 900-1260 7200-10080
400X100X200 12 1800-2520 14400-20160
225X112.5X60 27 4050-4500 32400-36800
125X60 21 3150-3550 25200-29500
200X100X60 21 3150 25200
200X165X60 9 1350 10800
250x250x60 8 1200-1650 9600-10050
(3).Detailed description
1. QT6-15A block making machine use German Siemens Motor, this brand produce the best motor in the world, its lifespan is 1.3 times than that of common motor
2. QT6-15A Automatic block making machine Japan Mitsubishi PLC control system and Omron travel switch, man-machine interface, achieve dialogue and exchange between man and machine. Dozens of mechanical action of different products could be adjusted through the menu to select the addition and subtraction without needing professionals.
3. QT6-15A Automatic block making machine as a multi-purpose machine, exchanging mold can produce normal bricks, hollow bricks, multi-holes' bricks
4. QT6-15A Automatic making block machine scatter material through revolving 360 degree, this process likes to mix the material again after the mixer, the technology makes the blocks evenly and high density
5. Mould get heat treatment, use carburizing, antiwear ability is 1.2 times as the other mould
6. When pressing, the excess oil will be turned to Li Zhen-hit, and computer controlled directional vibration, frequency and brake to cancel the vibration energy
7.QT6-15A block making machine feeding in low-frequency, vibrating in high-frequency, and increasing in Head tanks. Table and Mould vibrating together will make concrete fully liquefied and exhausted in 2-3 seconds to achieve high-density and high strength, Particularly be suitable for the production of high-strength blocks, you can stack immediately after forming
8. Hopper installed a swing-type cutting device, it can put the materials into the molding box uniformly by adjusting the swinging fork 9. The host keeping material controlled by photoelectric, material that is used upon to avoid the impact of aftershocks, some concrete liquefied advanced