CNC Professional Woodworking Engraving Machine / Router JCUT-1325AV

Application of CNC Professional Woodworking Engraving Machine / Router:

---This machine is widely used in woodworking, carving, cutting, engraving, work materials are wood, MDF, aluminum panels, ABS, acrylic, PVC, a variety of decorative materials. It is a professional and efficient woodworking engraving machine.

 

Features of CNC Professional Woodworking Engraving Machine / Router:

1. 4.5KW variable speed , water-cooled spindle, high power, high precision . Long lifetime.

2. Whole machine is welded with seamless steel structure, good regidity. The side board of gantry adopt steel structure.

3. All adopt imported square oribit , two line sliding track, heavy loading, stable working , high precision and long lifetime.

4. Adopt imported ballscrew , high precision.

5. Adopt advanced CNC system (NCstudio or DSP control system), This system have break point memory mode and special saving made of different points so that can make sure continuous working after electronic drop or other postpone situation.

 

Parameters:

JCUT MODEL: JCUT-1325AV CNC Router
Working Area (X*Y*Z): 1300X2500X150mm(51.2X98.4X5.9inch)
Processing accuracy: 0.01mm
Repositioning accuracy: 0.03mm
Spindle: 4.5KW variable speed , water-cooled
Spindle rotating speed: 0-24000rpm/min
Max Moving Speed: 18000mm/min
Working speed: 0-10000mm/min
Driving mode: Z-Ball screw , XY-Rack drive
Voltage: AC380V/50Hz
Max. Power consumption: 6.2KW
Feeding Height: 200mm
Drive motor: Stepper (XZ-85BYG, Y-axis use two 85BYG motors)
Control system: NCSTUDIO ( or DSP USB interface optional)
Command: G. Code , mmg , plt , uoo, HPGL
Compatible Software: Type3, Artcut, ArtCAM, masterCAM software
Auxiliary equipment: Vacuum table & Dust collector
Running circumstance temperature: 0 - 45 ° C
Relative humidity: 25%-75%
Certificate: CE, FDA

Pack dimensions 1950mm X 3250mm X 1850mm wooden trunk
Net weight 1100KG
Gross weight 1200KG

Parts for free: Software in CD, Controlling Card (PCI card), Water Tank, Water Pump, Engraving Tools, Data Wire, Power Line, Brush, Spanner and Clamp.

 

The optional accessories:

Rotary axis, or other spindle(1.5KW/3KW/4.5KW/5.5KW/7.5KW).

 

Key point:

Please kindly tell us your engraving or cutting materials, and materials' size.

Then we can quickly check and recommend to you the right machine with right working area.

 

Warranty:

One year for machine.
We supply online service 24 hours a day MSN, Skype, Yahoo, Gmail and so on.
You can also contact us by email, and we will reply in 24 hours, or by phone if urgently.

 

Freight:

We can send this machine to your port or door address by sea. Do as you need.
If sending to your port, please tell us your port.
If sending to your door address, please tell us your address, and better with post code.