| Features |
Metallized film, dry construction, UL94V-0 resin end filled, non-inductive type.
|
|
Wide capacitance range, high voltage, long useful life, non polar dielectric.
|
|
|
Overvoltage withstanding up to 1.5 or 2Un, high ripple current.
|
|
|
Possible to replace Electrolytic capacitors in some cases.
|
|
|
Coating: Aluminum case, fire-retardant plastic case (UL 94 V-0), or polyester tape wrapping(Axial)
|
|
|
Terminals: Tinned copper wire, or copper bolt nuts, with copper bolt in the bottom.
|
|
| Applications | Widely used in solar and wind power inverter, electric vehicles, motor drives, welders, induction heating equipment, large-scale switching power supplies and other power electronic devices for filtering or energy storage. |
| Electrical Characteristics |
REFERENCE STANDARD: IEC 61071
OPERATING TEMPERATURE: -40℃ - +70℃/+85℃
CAPACITANCE RANGE: 6uF - 6000uF
CAPACITANCE TOLERANCE: ±5%(J), ±10%(K)
VOLTAGE RANGE: 500 - 3600VDC
DISSIPATION FACTOR: 0.2% max. at 1KHz, 25℃
DIELECTRIC STRENGTH: Between Terminals: 150% of rated voltage for 10 sec. at 25℃
Between Terminals to case: 3KV 50Hz for 60 sec.
INSULATION RESISTANCE: 5,000MOhm*uF/C min. (25℃, 1min)
SHOCK CURRENT CAPABILITY: du/dt>7V/μs
EFFECTIVE CURRENT: 7 - 200A
LIFE EXPECTANCY: 100,000 Hours at rated voltage and 70℃ |
| Notes |
Customization for special specification and requirement is available. Kindly contact with info at kowarytech.com for product datasheet. Thanks! |
