Universal high pressure fire-extinguishing device MWHDL170, instantaneous attack of fire without set-up times, 100 l water tank integrated, fire-fighting pressure 170 bar, performance of high pressure pump 21 l/min, driven by petrol engine 9.6 kW with easy-start valve, fire-extinguishing hose 60 m, DUPLEX fire-extinguishing attachment for spray stream and low expansion foam, foam agent can 5 l with suction hose 1 m, frame for permanent installation

Technical Characteristics:

Dimensions - 760 x 570 x 840 mm

Weight - 94 kg (with tank)

Type of power engine - 4-stroke petrol
engine, 1cyl. 9.6 kW
Type of starting - recoil rope starter

High pressure plunger pump - 3 cyl. 21 l/min

Maximum fire-fighting pressure - 170 bar

High pressure fire-extinguishing hose - 60 m
(300 bar)
Water tank - 100 liter

Suction of foam agent - serially

Spray piztol - DUPLEX fire-extinguishing
attachment

Advantages in an overview:
short time of setting-up in case of fire
optimum use of the cooling effect of water
quench effect by vaporization of water
extremely short time of fire-extinguishing
little recoil
minimum water consumption of maximum 25 l/min
avoiding of damage caused by fire-extinguishing water and prolongation
addition of foam agents only when needed
small built-in measurements in vehicle

Accessories are sold separately... Please indicate what accessories you need for your order.