Product Main

Specifications

Specifications of Spray Booth YS-15-50
 
Outside Dimension     
Pit 2 rows of pits in the ground for exhaust air, dimension of each pit is 13850×760mm(L×W), with galvanized grilles made by twisted steel and flat bar above.  
  
Escape Door   
Room Body   
  
Ceiling Lights: 18Units×4Pcs=72Pcs×36W, with electronic ballasts.
Side Lights: 22Units×4Pcs=88Pcs×36W, with electronic ballasts, vertically set, up and down interleaving installation.  
Generator Setting     
  
2 units, in total 4×7.5KW double-intake centrifugal fans for intake air, model YDW4.5M,air capacity is 21000m3/h for each fan;
2×11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-710H, air capacity is 36000m3/h for each fan. Equip manual dampers for exhaust air.
2 units RIELLO RG5S oil burners, heating productivity: 520000 Kcal/h, stainless steel heat exchanger, 2pcs pneumatic dampers actuate from spraying to baking cycle.
   Re-filter, high efficiency filter(ceiling filter), exhaust fiberglass fiter, activated carbon filter.
 
Technical Parameters of Spray Booth YS-15-50
 
Inside Dimension
15000×5000×5000 mm(L×W×H)
Outside Dimension
15144×6896×5600mm (L×W×H)
Width of Entrance
4000mm
Height of Entrance
4500mm
Escape Door Dimension
800×2000 mm(W×L)
Intake Air Fan Capacity
84000 m3/h
Exhaust Air Fan Capacity
72000 m3/h
Free Air Speed
≥0.3 m/s
Frequency of Air Exchange
223(time/h )
Maximum Working Temperature
80℃
Max. Heating Productivity
520000 Kcal/h
Illumination (Lux)
≥1200
Air Filter Efficiency
≥95%
Noise
<85db
Total Power
59.5KW