Patent Product] 2010 new 2in1 LED table lamp
Item No.: PD603
This product adopts 3-phase brushless generator and solar panel for power generation to charge its inside 250mAh/3.6V chargeable lithium battery after commutating. The power stored is transformed to the LEDs via switch to be used for lighting. With a Torch Switch to control the model: desk lamp--torch--Off.
Specification:
Bulb type: 1 super bright LED for torch and 3white LED for desk lamp
Battery type: 3.6V 250mAh rechargeable Lithium battery
Working mode: desk lamp--torch--Off
LED lighting time: 3hours when fully charged
Charging/discharging circle: appox. 500 times under normal condition
Material(main body): ABS
Light weight size convenient to carry
Bulb type: 1 super bright LED for torch and 3white LED for desk lamp
Battery type: 3.6V 250mAh rechargeable Lithium battery
Working mode: desk lamp--torch--Off
LED lighting time: 3hours when fully charged
Charging/discharging circle: appox. 500 times under normal condition
Material(main body): ABS
Light weight size convenient to carry
1) Main Technical Parameters:
|
The Max. Luminous flux for table lamp
|
≥12 Lm
|
|
The Max. beam luminous intensity for table lamp
|
≥ 50000mcd
|
|
The Max. Luminous flux for torch
|
≥15 Lm
|
|
The Max. beam luminous intensity for torch
|
≥ 60000mcd
|
|
Working time for torch after full charged
|
≥8hour
|
|
Working time for torch after full charged
|
≥10hour
|
|
Lighting time after 1 minute cranking(3LED)
|
≥12 Minutes
|
|
Lighting time after 1 minute cranking(1 Super bright LED)
|
≥8 Minutes
|
|
Lighting distance(Center point luminous intensity 0.2lux)
|
≥10m
|
|
LED lifetime
|
≥100000 Hours
|
|
Full charging time by USB adaptor
|
≥4hours
|
|
It provides 3~8 minutes’ talking time to mobile phone by cranking 3 minutes
|
|
2) Main parts life-span:
|
Switch
|
≥10000 Times
|
|
The whole unit
|
≥5 Years
|
|
The plastic part
|
≥5 Years
|
3) Size and Weight:
|
Product size
|
43.5*43*145mm
|
|
Product weight
|
92g
|
4) Others:
|
Specification of built-in battery
|
Chargeable lithium battery,250mAh, 3.6V
|
|
Motor
|
1.5W
|
|
Material of main body
|
ABS
|
Charging operation:
-
Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
-
Plug USB charger into rechargeable hole to charge its inside battery.
Cautions:
Don’t point at eyes directly so as not to hurt the eyes.
Pay attention to the holding gesture when cranking so as not to hurt your fingers.
In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
b) please crank it for at least 1 minute once a month.
Do not place this product in where temperature or humidity is high.
Do not drop or hit this product.
The product will be a little heated when cranking for a long time.
We reserve the right to change the specifications of the hardware and software described in this manual without prior notice.