3D wheel aligner
Model: SX-G6T
Characteristics of 3D Wheel Alignment
1.3D cameras alignment— Based on the car and not influenced by the platform
2. Measurement system— equipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3. Target disk— There is no electronic components, so the wheel alignment will not has a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5. Measurement progress— no need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system— — Easy to operate, complete conventional basic parameters within two minutes , significantly faster than conventional aligners
7. Daily Maintenance— Easily maintenance , download and upgrade freely for the model data
Technical Specification:
Measurement project
|
Accuracy
|
Measurement range
|
Measurement project
|
Display accuracy
|
1′ /1mm
|
|
Display accuracy
|
Camber
|
± 2′
|
± 10°
|
Camber
|
Caster
|
± 6′
|
± 20°
|
Caster
|
Kingpin Inclination
|
± 6′
|
± 20°
|
Kingpin Inclination
|
Toe-in & Toe-out
|
± 2′
|
± 20°
|
Toe-in & Toe-out
|
Set back
|
± 2′
|
± 5°
|
Set back
|
Thrust angle
|
± 2′
|
± 5°
|
Thrust angle
|
Wheel Deviation
|
± 2mm
|
|
Wheel Deviation
|
Axis Deviation
|
± 2mm
|
|
Axis Deviation
|
Measurement project
|
Accuracy
|
Measurement range
|
Measurement project
|