MFZ1-YC SERIES DC DRY-VALVE SOLENOID
(1)Porpose
This series solenoid that is designed by the local combined institution is applied to single-phase full wave DC suppy control circuits,which voltage can rach 220V,as a component of the gydraulic solenoids dirctional valve.
(2)Usual Service Conditions
It can be installed randomly.
There is no gas or dust which can corrupt metal or destroy nonconductor.or,it will affect the products lifetime.
The solenoids fit for the character of service as followe:disconnected continuous duty system,intermittent recycled duty system.
The reasonable wave rqnge of supply voltage is betweent 85%-110%(any special requirements is possible).
(3)Key Parameters
(4)Purchase Code
(5)Externality&Installation Dimensions
(6)Operating Notice
The socket,which solenoids used,is according to ISO4400 standard.Including two specifications:indicator light&without light.You can choose according to your reuqirments.The voltage of the socket,with indicator light,must conform to the voltage of solenoid itself.
The pushpin of the solenoid is used in adjustment or some times in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not stride it.The wallop can destroy the pushpin and the surface of the leading hold,orthe solenoid will leak oil or cannot prqosition.
When solenoid is used in double directions,remember the solenoids cannot be energized at the same time in order to prevent the solenoids form burning.
There is a protector of over-current between electrical control systems and solenoids,in order to prevent the solenoids and the electrical component form buming in improderly conditions.
(7)Explantion Of Sample
If client have special requirements,we can dajust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
The main perfonance parameter is obtained in the conditions of lab.Finally explanation and changing of the paramters by HONT.
(1)Porpose
This series solenoid that is designed by the local combined institution is applied to single-phase full wave DC suppy control circuits,which voltage can rach 220V,as a component of the gydraulic solenoids dirctional valve.
(2)Usual Service Conditions
It can be installed randomly.
There is no gas or dust which can corrupt metal or destroy nonconductor.or,it will affect the products lifetime.
The solenoids fit for the character of service as followe:disconnected continuous duty system,intermittent recycled duty system.
The reasonable wave rqnge of supply voltage is betweent 85%-110%(any special requirements is possible).
(3)Key Parameters
|
Code
|
Rated Voltage(V)
|
Rated Force (N)
|
Rated Stroke (mm)
|
Total Stroke (mm)
|
Consumed Power(W)
|
Static Oil Pressure (MPa)
|
Operating Frequency (T/h)
|
|
MFZ1-1.5YC
|
12/24/110/220
|
≥15
|
3
|
≥6
|
≤20
|
6.3
|
7200
|
|
MFZ1-2.5YC
|
12/24/110/220
|
≥25
|
3
|
≥6
|
≤20
|
6.3
|
7200
|
|
MFZ1-3YC
|
12/24/110/220
|
≥30
|
5
|
≥6
|
≤20
|
6.3
|
7200
|
|
MFZ1-4YC
|
12/24/110/220
|
≥40
|
6
|
≥8.5
|
≤40
|
6.3
|
7200
|
|
MFZ1-5.5YC
|
12/24/110/220
|
≥55
|
4
|
≥8.5
|
≤40
|
6.3
|
7200
|
|
MFZ1-7YC
|
12/24/110/220
|
≥70
|
7
|
≥10.5
|
≤40
|
6.3
|
3600
|
(4)Purchase Code
|
Vatve-using Solenoids
|
DC
|
Design Code
|
Rated Force (Kgf)
|
Wet
|
|
MF
|
Z
|
1
|
1.5/2.5/3/4/5.5/7
|
YC
|
(5)Externality&Installation Dimensions
|
Code
|
External Dimensions
|
Installation Dimensions
|
||||||
|
A max
|
B max
|
d1
|
D
|
a
|
d
|
L1
|
L2
|
|
|
MFZ1-1.5YC
|
36.5
|
77
|
φ3
|
φ8.5
|
28±0.18
|
φ4.5
|
3±0.2
|
8
|
|
MFZ1-2.5YC
|
47.5
|
79
|
φ4
|
φ8.5
|
38±0.20
|
φ4.5
|
3±0.2
|
8
|
|
MFZ1-3YC
|
50.5
|
79
|
φ7
|
φ12.5
|
41±0.20
|
φ4.5
|
5±0.2
|
13
|
|
MFZ1-4YC
|
55.6
|
100
|
φ7
|
φ12.5
|
45±0.20
|
φ5.5
|
6±0.2
|
13
|
|
MFZ1-5.5YC
|
55.6
|
100
|
φ7
|
φ12.5
|
45±0.20
|
φ5.5
|
4±0.2
|
11
|
|
MFZ1-7YC
|
72.6
|
111
|
φ8
|
φ13
|
60±0.20
|
φ6.5
|
7±0.2
|
10
|
(6)Operating Notice
The socket,which solenoids used,is according to ISO4400 standard.Including two specifications:indicator light&without light.You can choose according to your reuqirments.The voltage of the socket,with indicator light,must conform to the voltage of solenoid itself.
The pushpin of the solenoid is used in adjustment or some times in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not stride it.The wallop can destroy the pushpin and the surface of the leading hold,orthe solenoid will leak oil or cannot prqosition.
When solenoid is used in double directions,remember the solenoids cannot be energized at the same time in order to prevent the solenoids form burning.
There is a protector of over-current between electrical control systems and solenoids,in order to prevent the solenoids and the electrical component form buming in improderly conditions.
(7)Explantion Of Sample
If client have special requirements,we can dajust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
The main perfonance parameter is obtained in the conditions of lab.Finally explanation and changing of the paramters by HONT.