AD16MM & AD22MM Indicator Light

(1) Genreral Introduction:

• AD16, AD22 series pilot lamp only use LED lamp as the light source. The advantage have: long life, gentle weight, small, save energy. It is the advanced product of all kinds of the incandescence lamp and the neon lamp of the XD type.
• The cover of the lamp is made of PC material, and have good shock resistance. It can be used as indication pilot light, accident signal and other signals in the circuits of such equipment as telecommunication.

Electrical Live	≥ 30,000h
Permitted Voltage	± 20%(≥ 110V)
Dielectric Strength	2.5kV(AC RMS), 1min
Frequency	50~60Hz
Rated Operating Current	≥ 100cd/m2
Comparative Tracking Index	CT1≥ 100, flame retardant
Insulation Resistance	Ui≤ 60V, 5MΩ ; 60V＜Ui≤ 660V, 50MΩ
Light Color

• The frequency of AC type pilot lamp is 50～60Hz. If work in other frequency ranges, it will be broken .
• The common threshold value of anti-interference pilot lamp is below 40V; and if you need higher threshold value please tell us. We suggest that the threshold value shouldn' t be too high. Please check the routing If the inter ference voltage is too high.
• Connection error is not allowable to AC type dual-color light, otherwise pilot lamp will be broken.
• Avoid using welding mode to connect lines as possible and you should using general plug (2.5× 0.8mm) to connect and wear the protective sleeve. If you need to weld, please finish it in 3 seconds by the electric iron which is below 30W and don' t exert external force on terminals .