HJ-600 Ribbon Printing Machine has higher performance price ratio compare with other similar products. As the price is the key for a product to survival, we help our clients to save 30%-50% equipment costs and complete 100% mission.

    It is need only 30mins from turning on machine to running properly.

1.      Width of printing  1) printing area 60cm  2) different width of printing as customer requirements

2.      Product features

1)      Temperature controller: HJ-600 Ribbon Printing Machine Voltage: 110V-285V AC; Output type: solid state; Alarm: relay contact output or 12CDV voltage output; Control: It is fuzzy operated by microprocessor PID which can be automatically set internal parameters based on external environment and the type of device to get best performance; Control accuracy: plus or minus 0.2 degrees; Performance life: desired to 10 years.

   

Features: around heating, heating up fast, steady oil temperature, continuous printing without chromatic aberration.

 

2)      Transducer performance and features: HJ-600 use advanced control to achieve high torque, high accuracy and wide range speed control drive so that it can meet the printing speed requirements of all kinds of ribbon, elastic belt, snow ribbon etc. It is control through space voltage vector PWM, speed sensorless vector control and the overall design of electromagnetic compatibility to meet environmental requirements of high torque with low noise and low electromagnetic interferences.

1.      controlled through space voltage vector PWM, speed sensorless vector

2.      1Hz, 150%nominal torque

3.      functional integrity, compact, suitable for supporting all occasions.

4.      more stable with ACR and automatic current limit function.

5.      multi-split with constant voltage achieved by built-in PID controller (Optional )

6.      up to 16 multi-speed control and user-friendly textile wobble frequency make it with high proficiency.

7.      pulse input & output interface of 0-20KHz is convenient to form digital closed-loop control system.

8.      it can be set a build-in RS485 communication Interface to achieve centralized control and Master-Slave Coordinated Control.

    Features: stable operation, clear print, greatly reduce the cost of customer.

3.      Position System:

1)      Material Positioning System: HJ-600 Ribbon Printing Machine adopts triple vertical positioning system. accurate positioning, entire roll, high speed of more than one rolls printing simultaneously, high profits.

( suitable for printing all kinds of mobile lanyard, shoelace, belt , elastic, snow ribbon and label )

2)      Transfer Printing Positioning System: HJ-600 Ribbon Printing Machine adopts air shafts increasing expansion force conditioner.

Main body of axis is made by high quality steel tube, coated by chrome on surface. scalable and flexible aluminum cam key; high-quality rubber internal bladder; quick charge and exhaust gas nipple; good sealing effect; long serviceable life; dismountable axle housing convenient to repair. The expansion height of single side could be 5mm-6mm after being inflatable. For example, if its diameter was 74mm-75mm, after be inflatable it would be 79mm-82mm. Special expansion height should be required separately. 3-inch button style air shafts; 76mm usually inside diameter; It can meet the different requirements of printing area, and highly improve efficiency.

 

Features: Printing paper will not shift around in printing process. Old model machine needs several workers to operate, but our machine needs only one worker with two positioning system mentioned above. Printing speed has been improved also.

 

4.       Power & Voltage