Detailed Product Description
35W dual output
1.Switch power supply witch CE.
2.Competitived price,Shortest lead time.
3.Sample order is available
1.Switch power supply witch CE.
2.Competitived price,Shortest lead time.
3.Sample order is available
35W dual output,dual switching power supply,switching power supply design
105°C output capacitor
With short-circuit and overload protection
AC Input Power
100% full-load burn-in test
High efficiency&Low Operation temperture
Installed with EMI filter,minimum wave
|
Model
Performance
|
D-30A
|
D-30B
|
||
|
CH1
|
CH2
|
CH1
|
CH2
|
|
|
DC Output Volta
|
5V
|
12V
|
5V
|
24V
|
|
Output voltage tolerance(Note 2)
|
±2%
|
±1%
|
±1%
|
±1%
|
|
Rated output current
|
4A
|
1.3A
|
2.2A
|
1A
|
|
Output current range
|
0.5-4A
|
0-1.3A
|
0-4A
|
0.1-1A
|
|
Ripple and noise(Note 3)
|
50mVp-p
|
50mVp-p
|
50mVp-p
|
100mVp-p
|
|
Inlet stability(Note 4)
|
±0.5%
|
±0.5%
|
±0.5%
|
±1%
|
|
Load stability(Note 5)
|
±0.5%
|
±0.5%
|
±0.5%
|
±4%
|
|
DC output power
|
32W
|
75W
|
||
|
Efficiency
|
72%
|
74%
|
||
|
DC voltage adjustable range
|
CH1+10,-5%
|
CH1+10,-5%
|
||
|
Input voltage range
|
85~132VAC/170~264VAC;choice by switch 47~63Hz;240-370VDC
|
|||
|
Input current
|
0.86A/115V 0.45A/230V
|
|||
|
Surge Current
|
Cold Start current 18A/115V 36A/230V
|
|||
|
Leakage Current
|
<0.5mA/240VAC
|
|||
|
Overload protection
|
105%~150% type:FOLDBACK cut off output reset:Automatic recovery
|
|||
|
over-voltage protection
|
……
|
|||
|
High temperature protection
|
……
|
|||
|
temperature coefficient
|
±0.03%°C(0~50°C) ON+5V OUTPUT
|
|||
|
Start-up,upper,rentention time
|
200ms,50ms,30ms
|
|||
|
shock resistance
|
10~500Hz,2G 10min./1circle,time:60min.,axes
|
|||
|
Withstand
|
Input to Output Isolation:1.5KVAC,iutput shell:1.5KVAC,output:0.5KVAC
|
|||
|
Insulation Resistance
|
Input to Output Isolation,Input&out shell,output&out shell:0500VAC/100M Ohms
|
|||
|
work Temperature/
humidity
|
-10°C~+60°C,20%~90%RH
|
|||
|
Storage Temperature,temperature
|
-20°C~+85°C,10%~95RH
|
|||
|
Outline dimension
|
129*98*38mm
|
|||
|
Weight
|
0.4Kgs
|
|||
|
Safety standards
|
Satisfy UL1012 REQUIREMENT (NOT QPPLY FOR THE MARK)
|
|||
|
EMC Standard
|
Satisfy FCC PART15 J CONDUCT 10N CLASS A
|
|||
|
Note:
1.The above parameters test conditions: 230VAC input, rated load, 25 °C 70% RH.
Humidity.
2.Tolerance: includes set up tolerance, line stability and load stability (Note 5).
3.The ripple test:20MHz with A12 "twisted pair, interrupted with a 0.1uF & 47uF
capacitor circuit.
4.The incoming line voltage stability test: the minimum full load voltage of the
incoming line to the highest voltage.
5.Load stability test: the load from 0% to 100%.Others output is 60% rated load.
6.Each output can reach max current,but the total load can't over the max output power.
|
||||