YPA M602 condenser instrument microphone
Microphone Type
      Condenser (electret bias)
  Polar Pattern
      Cardioid (unidirectional), symmetrical about axis
  Frequency Response
     40 to 18,000 Hz
  Polarity
      Positive pressure on diaphragm produces positive voltage
      on pin 2 relative to pin 3 of microphone output connector
  Output Impedance (at 1000 Hz)
      600 ohms
  Sensitivity (at 1000 Hz)
      -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
  Electromagnetic Hum Sensitivity
      -7 dB equivalent SPL in a 1 millioersted field (60 Hz)
  Switch
      Built-in On/Off switch
  Recommended Input Load Impedance
      800 ohms minimum
  Output Clipping Level (1 kHz, 1 % THD)
 2000 ohm load
      -13 dBV (0.22 V) (phantom)
      -17 dBV (0.14 V) (battery)
  Maximum SPL
      2000 ohm load: 131 dB (phantom), 127 dB (battery)
　 Self-Noise (Equivalent SPL)
      20 dB typical, A-weighted
  Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)
      111 dB (phantom); 107 dB (battery)
  Signal-to-Noise Ratio
      68 dB (IEC 651)* at 94 dB SPL
  Power
 Phantom Power
     Supply Voltage: 11 to 52 Vdc
      Current Drain: 2.0 mA max at 52 Vdc
      Maximum External Voltage Applied to Pins 2 and 3 with respect to
    Pin 1: +52 Vdc
      Reverse polarity protected to: 100 Vdc
  Battery Power
      Recommended: 1.5 V alkaline AA size (NEDA 15A)
      Life: up to 10,000 hours
  Connector
      Three pin professional audio connector (male XLR type)
  Case
      Steel and brass construction with black painted finish
  Environmental Conditions
      This microphone operates over a temperature range of -29 to 57
      degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative
      humidity of 0 to 95%.
  Weight
      Net: 250 g (8.8 oz) less battery
      Packaged: 880 g (1 lb 15 oz)