*Welding voltage: 25-30v
*Rated current: 160A
*Electrode φ Mm: 1.6-4.0
Model: KDW6000CX

*Automatic air bleeding mechanism
*AC Voltmeter
*DC Output
*AC Circuit Breakers
*DC Fuse Protection
*Full-power Switch on Dual Voltage
*Extra Large Fuel Tank with FuelGauge
*Large Capacity Silent Muffler

Optional Equipped
*Low Oil Shut Down
*4-wheel Kit
*Electric Starter*Battery
*Remote start function

CL: Large Fuel Tank/Control Panel
* CX: Large fuel tank / Control Panel / Low Oil Shut Down
* E: Electric Start
* W: Welding Generator

Rated frequency (Hz)	50   60
Rated power(kW)	5.0  5.5
Rated voltage (V)	230   240/120
Rated current (A)	21.7 23/45.8
No.of phase	Single
Power factor (cosφ)	1.0
Weldling voltage at zero load (DC)(V)	60-70
Rated weldling current DC(A)	160
weldling voltage(DC)(V)	25-30
Weldling load continous ratio	60%
Weldlig current adjustment range(A)	50-190
Electrode φ(mm)	1.6-4.0
Rated speed (r/min)	3000   3600
Excitation mode	Self-excitation and constant voltage (AVR)
Recifying mode	IGBT+three-phase rectifying bridge (PWM)
Insulation grade	F
Pole number	2
Engine Model	KD186FA
Engine type	Single-cyinder,four-stroke,OHV,air-cooled
Cylinder NO,-bore×stroke(mm)	1-88×64
Displacement	389
Rated power[kW(Hp)/(r/min)]	7.0/3000 7.7/3600
Compression ratio	8.5:1
Rated rotation speed	3000 3600
lgnition system	T.C.I
Cooling system	Air cooled
Lubrication system	Splash
Starting system	X:Recoil starter E:Electric starter
Fuel type	Automotive unleaded gasoline
Lube oil Brand	CDgrade or SAE10W-30,15W-40
Capacity of cooling Water(L)	Without
Lube capacity (L)	1.1
Starting motor capacity (V-kW)	12V 0.4kW