1. Output power: 0.4W

2. Open circuit voltage: 5.5 V

3. Lithium battery: 1000mAH

4. Rated output current: 700 MAH

5. Size & weight of charger: 125x64x25 mm, 135g

6. Suitable for most brands of mobile phones and any mobile digital product which with USB port, simply changing the different connectors provided.

 

Product Features

1. Use the sunlight to charge your phone mobile phone.

2. The built in lithium battery can be charged by sunlight, AC power.

3. The built in battery can also be used as a charger if no sunlight is available (can provide up to 150 minutes of talk time depending on handset).

4. Suitable for a wide range of phone mobile phone.

 

Operating Instructions

1. Insert phone in the interface of the phone sheath. Turn on the phone sheath power switch to (ON), then charging sheath will charge for phone, rechargeable volume indicators will be luminous, and I=25% electricity, I,II=50% electricity ,I,II,III=100% electricity .

2. after phone is fully charged, please press the sheath power switches to (OFF).

3. Connect USB cable to the computer to charge for silica sheath, with power increasing, indicators will change according to the charging time. 

4. Put the production in sufficient sunshine ,solar panel in the sunshine ,turn on the switch to (ON),it will charge for the cell phone directly ,Turn off the switch to (OFF),the electricity will be stored to internal battery automatically ,Under sufficient sunshine ,charging within12 hours will be full.

5. When power indicator is off, the electricity of internal battery is used up; it can be charged by method of 3 and 4.