Three Phase Invertor are used in Industrial or power plant applications,which generally , operated from 220 Volt DC stationary high capacity chargeable batteries power is used to convert DC to 3 Phase 380 or 400VAC, 100 to 200KVA or more . can be use for lighting , power supply for Controls, Emergency shut off vales,Special lube oil pumps, burner ,Gas valve etc..
For more info.Welcome to inquiry me for more details.
Contacts: Miss Joanna
We have confidence to be your best business partner in CHINA.All inquiries will be replied with in 24 hours.Welcome to send us inquiry for more details.
1,Specification:
|
YTP-****-T
|
1000W
|
2000W
|
3000W
|
5000W
|
7000W
|
8000W
|
10000W
|
15000W
|
20000W
|
Input
|
Rated capacity(W)
|
1000W
|
2000W
|
3000W
|
5000W
|
7000W
|
8000W
|
10000W
|
15000W
|
20000W
|
|
Commercial Power range(VAC)
|
380V±20%
|
||||||||
Output
|
AVR voltage range(VAC)
|
384V±5%
|
||||||||
Transfer time
|
7MS
|
|||||||||
Battery
|
DC Voltage
|
48VDC
|
96/192VDC
|
192VDC
|
||||||
Input
|
Frequency(Hz)
|
45-65
|
||||||||
Output
|
Waveform
|
(Pure sine wave)
|
||||||||
Frequency
|
50Hz/60Hz±0.5%
|
|||||||||
protection
|
overload
|
Input/output over high or low protecting;low battery protecting;surge and pike-currents protecting; overload protecting 100%-120% 30sec; >120% 100ms; >150%, 50ms output short circiut <150ms
|
||||||||
Battery
|
TYPE
|
Sealed, maintenance-free lead acid
|
||||||||
Recharge current
|
15A(Maximum)
|
20A(Maximum)
|
||||||||
Battery protection
|
Automatic self-test, discharge protection, over-chargeing protected, smart management system.
|
2. Performance Specification of Intelligent Inverter:
(1) The inverter is designed by our company independently; it’s controlled by CPU, high quality, low cost and the pure sine wave intelligent inverter.
(2) The inverter can be used for any loads (including fan, refrigerator, air-condition, water pump electromotor etc). it has solved the square wave, quasi sinusoid output inverter’s disadvantages of doing harm to some loads.
Notice: before you use your equipments, you must confirm it’s 1 phase 3 wires (1 is earth) or 3 phases 5 wires (1 is earth). Otherwise it will damage your equipments.
(3) Full automatic intelligent switching.
(4) Output short circuit protection (when the inverter is working on battery mode): when there is short circuit, the inverter will indicate it and the machine will shut down automatically.
(5) Overload protection: when there is overload, the machine will prompt you and protect the inverter from being damaged automatically. Over100%-120%, inverter shuts down about 30s later, over 120%, inverter shuts down at once.
(6) Battery protection: single battery voltage is 10V (limited only in the maintenance free).
(7) Disturbing power protection: surge protection.
(8) City power over-high protection is 480V AC. City power over-low protection is 300V AC or over-high 480VAC.
(9) When the city power R-phase is normal, the battery can charge automatically. can use a DB9 cable connecting with your equipments. It need a 6V to15V DC voltage keeping more then 3 seconds.