Use of video on the digital system, three separate temperature integrated design, a more accurate temperature control of small pitch BGA, no screen printing frame, screen frame shift mount for precise alignment, 90 ° Rotating hot air welding;
Equipment can be connected into the computer control, test the temperature curve temperature curve parameters of each transfer;
The first zone, second temperature zone heater with good heating material, can accurately adjust the hot air flow and temperature, resulting in high-temperature wind, the third temperature by far-infrared heating panels warm;
The first zone, second temperature to 8 liters (down) section of constant temperature control +8, can store 10 groups of temperature curve;
The first zone, second temperature zone up and running at the same time temperature curve, and the third temperature zone with the first and second temperature at the same time start up (down);
The first zone, second temperature zone over-temperature protection design;
Before and after the first heater temperature up and down adjustment, easy to operate;
The second temperature zone PCB board according to the different appearance, different height elements adjust up and down, to prevent collision with the board bottom component;
Demolition, welding after the constant use of high flow cooling fan on the PCB board to prevent the deformation of PCB board to ensure the welding effect;
PCB adjustable jaws designed to prevent collisions with the component;
Hot air nozzle with a variety of sizes, or custom-made according to special requirements; hot air nozzle 360 degree rotation, easy to replace;
Adjustable PCB bracket, positioning the rack protection against hot design;
With the upper heater over-temperature protection;
Demolition, welding after the alarm function with audio;
Technical Specifications
PCB size ≤ L500 × W420
PCB thickness: 0.5 ~ 3mm
Table Fine: ± 7 before and after around (Right / Left) ± 7
Tuning accuracy: 0.01
Tuning angle: 360 °
Table adjustment: ± 210 or so before and after (Right / Left) ± 250
Temperature control: K-type thermocouple, closed-loop control
PCB positioning method: appearance
Preheat the bottom: IR 3000W
Nozzle heating: Hot air 600W
Power supply: Single phase 220V, 50/60Hz, 2.2KVA
Machine size: L670 × W580 × H650
Weight: about 80kgs
Equipment can be connected into the computer control, test the temperature curve temperature curve parameters of each transfer;
The first zone, second temperature zone heater with good heating material, can accurately adjust the hot air flow and temperature, resulting in high-temperature wind, the third temperature by far-infrared heating panels warm;
The first zone, second temperature to 8 liters (down) section of constant temperature control +8, can store 10 groups of temperature curve;
The first zone, second temperature zone up and running at the same time temperature curve, and the third temperature zone with the first and second temperature at the same time start up (down);
The first zone, second temperature zone over-temperature protection design;
Before and after the first heater temperature up and down adjustment, easy to operate;
The second temperature zone PCB board according to the different appearance, different height elements adjust up and down, to prevent collision with the board bottom component;
Demolition, welding after the constant use of high flow cooling fan on the PCB board to prevent the deformation of PCB board to ensure the welding effect;
PCB adjustable jaws designed to prevent collisions with the component;
Hot air nozzle with a variety of sizes, or custom-made according to special requirements; hot air nozzle 360 degree rotation, easy to replace;
Adjustable PCB bracket, positioning the rack protection against hot design;
With the upper heater over-temperature protection;
Demolition, welding after the alarm function with audio;
Technical Specifications
PCB size ≤ L500 × W420
PCB thickness: 0.5 ~ 3mm
Table Fine: ± 7 before and after around (Right / Left) ± 7
Tuning accuracy: 0.01
Tuning angle: 360 °
Table adjustment: ± 210 or so before and after (Right / Left) ± 250
Temperature control: K-type thermocouple, closed-loop control
PCB positioning method: appearance
Preheat the bottom: IR 3000W
Nozzle heating: Hot air 600W
Power supply: Single phase 220V, 50/60Hz, 2.2KVA
Machine size: L670 × W580 × H650
Weight: about 80kgs