LED Flood Light Features:
1. Use single powerful LED (5W-10W) as the light source, with our own intellectual property rights for LED encapsulation. Utilize the special design of multichip single module. Choose the imported high brightness semiconductor chips. With the characters of high heat conductivity, low luminous decay, pure light color and no ghosting.
2. The LED is closely connected to the crust. The heat from LED will be removed from the heatdissipation wing and also by the air cross-ventilation. It can ensure its life-span effectively.
3. The lights were sealed by silicone rubber, it makes the heat sink, end cap and the glass combined perfectly with each other. The surfaces were passed the treatment like anodic oxidation and plastic spraying. It can meet the requirement of IP65.
4. Use the high pure imported aluminum from Germany as the reflector This kind of reflector has high reflecting efficiency, and it can make sure the luminous flux. The special design of our reflector can improve the light uniformity and utilization ratio. It can control the light inside of a useful area. The advantage of the LED streetlights like power saving can be revealed adequately.
5. No delay start; No waiting. It can reach its normal light as soon as it is turned on. The switch can be used for hundreds of thousand times.
6. It is safe and removable, and it can be positioned at any angle. It is universal, and it can be used in a large scale.
1. Use single powerful LED (5W-10W) as the light source, with our own intellectual property rights for LED encapsulation. Utilize the special design of multichip single module. Choose the imported high brightness semiconductor chips. With the characters of high heat conductivity, low luminous decay, pure light color and no ghosting.
2. The LED is closely connected to the crust. The heat from LED will be removed from the heatdissipation wing and also by the air cross-ventilation. It can ensure its life-span effectively.
3. The lights were sealed by silicone rubber, it makes the heat sink, end cap and the glass combined perfectly with each other. The surfaces were passed the treatment like anodic oxidation and plastic spraying. It can meet the requirement of IP65.
4. Use the high pure imported aluminum from Germany as the reflector This kind of reflector has high reflecting efficiency, and it can make sure the luminous flux. The special design of our reflector can improve the light uniformity and utilization ratio. It can control the light inside of a useful area. The advantage of the LED streetlights like power saving can be revealed adequately.
5. No delay start; No waiting. It can reach its normal light as soon as it is turned on. The switch can be used for hundreds of thousand times.
6. It is safe and removable, and it can be positioned at any angle. It is universal, and it can be used in a large scale.
| LED Flood light-115series Details |
|