Model

JLH-152S

Needle bed

Length: 52〞

The steel needles are inserted on the needle bed. Replaceable Segment can be available when broken down.

Knitting width

Variable stroke. Max 52〞(132mm)

Gauge

3G, 5G, 7G, multi-gauge3-5-7G, 8G, 9G, 12G, 14G, 16G

Knitting speed

Knitting speed varies according to gauge and knitting condition. MAX. 1.2m/sec., 32 speed selection programmable command control.

Knitting system

One carriage with single system equips with high-position roller

Knitting cam

Composite design. Each system can perform Loop+tuck+not knitting simultaneously.

Transfer cam

Compound Knitting cam system, each system can transfer from the front to rear, rear to front or both front and rear simultaneously without direct restriction . Auto racking and auto receive.

Stitch cam

Each stitch setting is controlled by a stepping motor . It has 24 stitches of independent selections and each of them range from 00-99 steps for knitting pattern.

Needle selection

Each system has 4 sets hi-tech needle selectors. Double cam system equips with totally 8 sets needle selectors, which can be installed or removed simply from the carriage and maintained easily.

Yarn carriers

8 sets yarn carriers on 4 double side rails, switchable in any area within the knitting width. Also can be equipped with intarsia yarn carrier for intarsia pattern. (Optional device).

Sinker system

This system composes by two additional pieces of sinker needle bed. The sinker presser degree is adjustable the positions by knitting program command.

Racking system

Servo motor control, the programmable racking positions within 2 inches, each also has 1/4, 1/2and 3/4 micro adjustable positions.

Main take down roller

32 levels changeable tensions selection, adjustable automatically on each level. Can change the roller tension on the operation panel.

Carriage drive system

AC servo motor control, tooth shape driving belt, 32 section speeds limited built in. Knitting speed can be changed flexible depends on the knitting requirement.

Stop motion

Yarn breaking, knot, press off, needle break, yarn float, roll back, wrong racking, wrong sinker position, needle shock, excessive yarn, and reaching on production target offer, the machine will automatically stop.

Controller

Built-in controller. Data input by hand or USB memory disc. Stored program for flat knitting machine.

Memory capacity

1024× 4096 hung memory for the width and pattern length design.

Data input

USB memory interface.

Language display

English and Chinese are standard versions. Other languages can be supplied with customer’ s request. (Optional software)

Power supply

One phase AC 220V 1.2 KVA

Dimension & Weight

Length*Width*Height: 290*90*200cm. Net weight: 1400kg.