Function Introduction Of The Machine
■ Ultrasonic cleaning
To clean the dirt, carbide and sediment inside and outside of the injector
■ Shift speed test(Annotation: to Model II, the rpm can change continuously , Model I just can test at three immovable speed.750rpm, 4500rpm and 7500rpm)
To simulate the different rpm condition and test the injection situation of the injector, includes atomization, injecting volume etc.
■ Accelerating test
Test the working status and the injecting volume of the injector during accelerating condition.
■ Leakage test
To check if there is leakage when the system pressure is 0.3Mpa.
■Measuring injecting volume
To measure the injecting volume of certain injecting time(0－9900time)
■ Reverse flush
To flush the injector by reverse direction
■ Non-dismantle cleaning(this function and the accessories is optional)
To flush the injector on car(need not remove injector from the engine)
■ Unit information
The information of machine
Specifications
|
Speed range:
|
0～7500 rpm
|
|
Injecting time:
|
0～9900 time
|
|
pulse:
|
0～20.0 ms
|
|
Time duration:
|
0～10 minute
|
|
System pressure:
|
0～0.5 Mpa
|
|
Capacity of test fluid tank:
|
2000 ml
|
|
Ultrasonic power:
|
60W
|
|
Ultrasonic frequency:
|
40 KHZ±0.5 KHZ
|
|
Measuring cylinder capacity:
|
140 ml
|
|
Measuring cylinder accuracy:
|
0.2 ml
|
|
dimension:
|
555×465×480mm
|
|
weight:
|
15 Kg
|