-Three-way large-format line array module
-Two 15 loudspeakers with neodymium magnet line array
-Four 8 loudspeakers with neodymium magnetic line array speaker
-Two neodymium compression driver with 1.5" exit line array system
-Captive rigging system integrated in the cabinet design
-Detachable front dolly panel

The large format Aero 50 is the evolution of the highly successful Aero 48. This externally powered, high efficiency line array module integrates low, mid and high frequency transducers in a single unit. Designed for use in large-scale events in stadiums and arenas, the Aero 50 offers a number of important improvements in terms of performance and weight reduction.

The low frequency reproduction is handled by two new 15" loudspeakers in a bass-reflex configuration. The 15" speaker incorporates a 100 mm (4") edge-wound flat wire voice coil and lightweight neodymium magnet assembly maximizing the dynamic response for a deep, precise bass. Four purpose-built 8MN, 8" cone transducers incorporating neodymium magnetic assemblies and 62 mm (2.5") voice coils are used for mid frequency reproduction. High frequency reproduction is handled by two M-75N compression drivers designed for use in high-level applications where abundant SPL and low distortion are mandatory. A pure titanium diaphragm featuring 75 mm (3") copper-clad aluminum EFW voice coil yields high sensitivity, low distortion and extended frequency response.

The rugged, trapezoidal enclosure is built using plywood and covered with a durable paint finish. The captive rigging system splay angles range from 0º to 9.6º and can be adjusted in 0.8º increments from 0º to 3.2º and 1.6º increments from 3.2º to 9.6 º allowing a wide range of column curvatures to be accomplished.