Product Main

Specifications

VAG ECU TOOL
 
The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.
  1. Read and write access to the EEprom.
  2. Reading the secret odometer (if stored in the engine control unit)
  3. Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
  4. With the write function is motor control "cloning" - no need to teach.
  5. Indispensable for workshops, recovery or Chiptuning.

 Functions of the program:     
  1. serial EEprom read and save 
  2. EEprom checksum checking and correction 
  3. IMMO on / off 
  4. EEprom from a file and write (clone function) 
  5. Read / write access to the login 
  6. Read / write access to the chassis number 
  7. Read / write access to the Immobilizernummer
  8. Kilometers Motronic in the read and write (if available)    
 In the ME7 .** controllers can also perform the following functions:    
  • Offset channels 
  • Mixture enrichment 
  • Idling torque change 
  • Lambda value 
  • Idle speed change 
  • Correct charge (only for Turbo engines) 
  • Ignition timing change    
 Supports the following types of motor control of BOSCH:
  1. EDC15 
  2. EDC15VM 
  3. EDC15P 
  4. EDC15P +   BOSCH ME7.5 
  5. BOSCH ME7.5.1 
  6. BOSCH ME7.1 
  7. BOSCH ME7.1.1