riveting machine

Rivetless riveting machine are joint two layers of several layers of metal board by punch or by roll press to made it formation into need, and becoming the work piece has the certain anti-pull strength and anti-share strength.

     Application scope: The rivetless riveting machine suitable for joint the steel plate, stainless plate, zinc and aluminum etc.

     The rivetless joints can divided punch joint, roll joint. In regard to the method, the roll joint by radial rivetless riveting machine to have many advantages obviously:

1Good quality after process and metal flown line are naturally, the pieces of layers are firm and smooth (can reach the  Ral.25um).

2Labor-saving and economy energy (pressure only 1/10-15 of the punch joint),the weight also lower. 

3It's unnecessary to match the boost cylinder equipment, therefore, the equipment's manufacturing cost more lowers

4The national patent technology ,the time shows can be adjusted and accurate to 0.1 second.

5Because of the gentle pressure, the molding tool to lower consumedly.

     In brief, the radial rivetless riveting machine is can instead of punch joint completely. The radial rivetless riveting machine are extensively used in automobile, light work, precise machine, electric appliances and hardware etc: such as the top-window of car, instrument board, mask of engine, humper, radiator, seat, window system of car, silencer, the door of refrigerator, the hull body of washer, the hull body of fan, copy machine, the hull body of computer and dentist's machine outer shell etc...

This kind of machine riveting joint function is strong, process stability has no rock, the surface are beautiful after process. It has plenty of adjustment function, the riveting pressure, riveting speed and feeding speed are all can be adjusted, to guarantee the best result effectively.

 

Main characteristic of;

Joint point are firm and credibility

 Rivetless,low cost.

Match the pre-pressure device,overcoming distort badly.

Riveting timepressure speed  are all can be adjusted.

National patent technology, number shows can accuracy to 0.1 second

Press gently ,the molding tool loss is small

Can transform into round or square

The riveting area has no stress

Can not break the plating or painting in surface

To the metals material request not high, the copper , aluminums, steel, zinc are all unlimited

Riveting process has no vibrationlow noiselow consumption

Unnecessary to processing in before or after riveting joint, allow to have the mezzanine and multi-layer conjunction

Advanced counter and time shows window

The electricity control system's operating are convenience and safety

Can riveting different shapes after replaced the different die

Work environment good, there is no poisonous smoke of dust exhaust, have no noise

The operation simple and consume low

Can design for bench type, vertical or traveling