Usages: Pressure Die Casting Machine is mainly used in casting the positive spine of Tube-kind lead acid battery, with low antimony content(less than 3%)

Composition: Host, Lead pot, Electric panel, Mould

Features:

○Use hydraulic pressure system to control the machine, with big pressure, and running stable.

○Use heating pipe to melting the lead, and the temperature can be automatically controlled with a range of adjustment.

○Use heating pipe to heat the nozzle, mould, display and control the

temperature with pressure meter, with alarm fuction(when temperature

too high).

○Use cycle water to cool the mould.

○The mould use H13 special mould material to produce according to the layout. Using safety interlock, automatically do the folloing: compound mould, casting spine, open mould, push-out(this is one cycle). To promise safety production.

○Electrical panel: Use Siemens brand screen and PLC to control, it will

display mode and parameters; with Manual and Auto type. And you can

enter parameters according to requirements.

 

Spec& Parameter:

Parameter Type	spine length(mm)	Spine Diameter	Lead pot(T)	Power(KW)	Production Ability
WF-300	≤ 300	≥ 1.8	1	38	4-6
WF-500	≤ 500	≥ 3.2	1	46	3-4
WF-700	≤ 680	≥ 3.2	1	50	3-4