Product Main

Specifications

125mA China Radiograhpy X Ray Machines YSX0104
USE
General radiography, Filter-ray device radiography
Unit Configuration 
Control, HT generator unit, Ht cable, X-ray tube unit, Diagnostic table, Collimator

Main Characters
1. Single table and single tube
2. Design according to the electric mechanism of middle-size machine. The function of this photography x ray is reasonable.
3. High-tension system is of split structure, with high-voltage generator of full-wave rectification and stable operation
4. Supply voltage (V), photograph kilovolt (kv) and stepless adjust able
5. Equipped with the manostat for filament of X-ray tube and the spacecharge compensator as to ensure the stable and accurate output
6. Equipped with the capacity limitation and portection circuit and KV mA S interlock limitation and protection
7. The timer circuit grade according to R10 priority coefficient and an exact time control
8. The radiograph flat table has a vibrating ray-filter
9. The pillar hast has only the bottom track only, with easy installation

Min Technical Indexes

Supply power
Voltage
single phase 220V/380V±10%
Frequency
50Hz±0.5Hz
Capacity
10KVA
Intemal resistance
380v: 2Ω, 220V: 0.6Ω (2Ω at 80v; 06Ω at 220V)
Max DC output voltage
90KV
Max DC output current
125mA
Radiograph
Voltage
50-90KV
current
Small focus 15mA, big focus 30mA 60mA 100mA  125mA
spot film
100mA(fixed)
time
0.04-6.3s, 24grades together
High-voltage generator
Capacity
7KVA
X-Ray tube
Model
XD4-2.9/100
Focus
Small focus 1.8mm  big focus4.3mm
Radiograph table
Bed face(L×W×H)
1960×660mm×700mm
Bucky
Grid density N28
Convergence distance fo 100cm
Grid ratio
Max size of cassette
356mm×432mm(14″×17″)
Pollar of X-ray source unit
Moving in length (along The bottom  table )
﹥1350mm
moving un breath
﹥360mm
moving up and down
720~1800mm
MAX VOLUME OF RADIOGRAPH
Focus of X-Ray tube
Radiograph mA
Max Radiograph KV
Max exposure time allow
Small focus
15mA
90KV
6.3S
Large focus
30mA
90KV
6.3S
60mA
90KV
6.3S
100mA
85KV
2.5S
125mA
82 KV
1.0S

Note: We will not make another notice if the contour of product and technical parameters will be changed.