Professional Power Amplifier, Audio Amplifier, Professioinal Audio Amplifier, Professional Amplifier, Karaoke Amplifier, PA Power Amplifier, Pro Power Amplifier, Pro Audio Equipment, PA System, Pro Amplifier, Audio Equipment.
1) Minimum power-to-weight ratio
2) Minimum power-to-volume ratio
3) Zero heat insulation cooling system
4) Segmented analysis on system temperature
5) Transistors line-up at zero thermal path difference
6) Cumulative analysis on high frequency power
7) Accurate power dispatching
8) Real-time / Online detecting of load resistance
9) Dynamic adjusting and analysis on the integrated output
10) Complete 2-channel, 2U amplifier series
11) Maximum output power up to 1500W@8ohms
12) Refined SMD production technology
13) All-round circuit soft protection without anintemal circuit break
14) S/N ratio more than 110dB even higher
15) High damper factor over 1500
16) High slew rate as high as 100v/us
17) 1 ohm parallel, low impedance loading
1) Minimum power-to-weight ratio
2) Minimum power-to-volume ratio
3) Zero heat insulation cooling system
4) Segmented analysis on system temperature
5) Transistors line-up at zero thermal path difference
6) Cumulative analysis on high frequency power
7) Accurate power dispatching
8) Real-time / Online detecting of load resistance
9) Dynamic adjusting and analysis on the integrated output
10) Complete 2-channel, 2U amplifier series
11) Maximum output power up to 1500W@8ohms
12) Refined SMD production technology
13) All-round circuit soft protection without anintemal circuit break
14) S/N ratio more than 110dB even higher
15) High damper factor over 1500
16) High slew rate as high as 100v/us
17) 1 ohm parallel, low impedance loading
|
PA04 Lightweight Power Amplifier |
|
| 8Ω Stereo Power(RMS) | 2 × 400W |
| 4Ω Stereo Power(RMS) | 2 × 600W |
| 2Ω Stereo Power(RMS) | 2 × 800W |
| 8Ω Bridged Power(RMS) | 1200W |
| 4Ω Bridged Power(RMS) | 1600W |
| 2Ω Parallel Power(RMS) | 1200W |
| 1Ω Parallel Power(RMS) | 1600W |
| Frequency Response(+o/-0.3dB,1W/8Ω) | 20Hz-20kHz,-3dB@135kHz |
| Phase Response ( at rated power 20Hz-20kHz) | <+/-8 degree |
| THD+N (at rated power 1kHz 1W ) | <0.025% |
| SMPTE IMD (rated power. 60 Hz/7kHz-1/4) | <0.075% |
| Damping Factor ( at rated power 63Hz) | >1500 |
| Controlled Slew Rate ( 1kHz tone burst 40dB gain) | >-100v/us |
| Voltage Gain ( 0.775V/0dBm ) | X73 |
| Input Sensitivity ( X40/36dB ) | 1.41V |
| S/N Ratio ("A"weighted, 1kHz, 1V input ) | >110dB |
| Max Output Voltage(40millisecond tone burst) | 100V |
| Power Current Draw (typical music) | 500VA/2.2A |
| Power Current Draw (over loading) | 1000VA/4.3A |
| Input Connectors (per channel) | Female XLR (pin 2+, configurable for pin 3+). TRS (tip+) |
| Output Connectors (per channel) | 5-way binding posts or Speakon connectors (market dependent) |
| Power Supply (factory configured) | AC220V/230V,50-60Hz |
| LED Indicators (per channel) | Signal, Protect, Active, Critical |
| Construction | Steel chassis, 16 gauge . Casting Aluminum front |
| Net Weight | 13.5kg |