Key Feature
1) Minimum power-to-weight ratio
2) Minimum power-to-volume ratio
3) Zero heat insulation cooling system
4) Segmented analysis on system temperature
5) Transistors line-up at zero thermal path difference
6) Cumulative analysis on high frequency power
7) Accurate power dispatching
8) Real-time / Online detecting of load resistance
9) Dynamic adjusting and analysis on the integrated output
10) Complete 2-channel, 2U amplifier series
11) Maximum output power up to 1500W@8ohms
12) Refined SMD production technology
13) All-round circuit soft protection without anintemal circuit break
14) S/N ratio more than 110dB even higher
15) High damper factor over 1500
16) High slew rate as high as 100v/us
17) 1 ohm parallel, low impedance loading

PA12 Lightweight Power Amplifier
8Ω Stereo Power(RMS)	2 × 1200W
4Ω Stereo Power(RMS)	2 × 1800W
2Ω Stereo Power(RMS)	2 × 2400W
8Ω Bridged Power(RMS)	3600W
4Ω Bridged Power(RMS)	4800W
2Ω Parallel Power(RMS)	3600W
1Ω Parallel Power(RMS)	4800W
Frequency Response(+o/-0.3dB,1W/8Ω)	20Hz-20kHz,-3dB@135kHz
Phase Response ( at rated power 20Hz-20kHz)	<+/-8 degree
THD+N (at rated power 1kHz 1W )	<0.025%
SMPTE IMD (rated power. 60 Hz/7kHz-1/4)	<0.075%
Damping Factor ( at rated power 63Hz)	>1500
Controlled Slew Rate ( 1kHz tone burst 40dB gain)	>-100v/us
Voltage Gain ( 0.775V/0dBm )	X126
Input Sensitivity ( X40/36dB )	2.45V
S/N Ratio ("A"weighted, 1kHz, 1V input )	>110dB
Max Output Voltage(40millisecond tone burst)	173V
Power Current Draw (typical music)	1500VA/6.5A
Power Current Draw (over loading)	3000VA/13A
Input Connectors (per channel)	Female XLR (pin 2+, configurable for pin 3+). TRS (tip+)
Output Connectors (per channel)	5-way binding posts or Speakon connectors (market dependent)
Power Supply (factory configured)	AC220V/230V,50-60Hz
LED Indicators (per channel)	Signal, Protect, Active, Critical
Construction	Steel chassis, 16 gauge . Casting Aluminum front
Dimension	88X482X400mm
Net Weight	17.7kg