block  making   machine QT6-15
block  making   machine (www,chinablockmachine,com) QT6-15    Introduction in Details:

1. As a multi-purpose machine, exchanging mold can produce standard bricks, hollow

bricks, multihole bricks.

2. When pressing , the excess oil will be tured to Li Zhen-hit, and computer controlled directional

vibration, frequency and brake to  cancel the vibration energy.
3. Feeding in low-frequency, vibrating in high-frequency, and table and Mould vibrating together will make concrete fully liquefied and exhausted within 2-3 seconds to achieve high-density and

highstrength, Particularly be suitable for the production of high-strength blocks, you can stack

immediately after forming.
4. Storing materials of the host machine is controled by the photoelectricity, material namely use

namely send to avoid the impact of aftershocks, some concrete liquefied advanced.
5. Swinging loading device is installed in the feeding hopper, it can put the materials into the molding box uniformly by adjusting the swinging fork. Imports of electric appliances and the original hydraulic component could make the control systerm and hydraulic system basically operate without fault; ten formulations kept by the computer can be called at random. dozens of mechanical action of different products could be adjusted through the menu to select the addition and subtraction without needing professionals.

block    making machine  QT6-15 main theoretical data
  Dimension of host machine      2850× 2200× 2850mm
  control style              PLC
  forming style          Hydraulic
  Vibration force        45KN
  vibrator style          table and mould vibrate together
  raw material feeding style        360 degree revole
  forming hight          40-250mm
  moulding period        15-20S
  moulding aera        800× 600mm
  size of pallet          940× 830× 25mm
  weight of host machine            11.5T
  Mixer style          JS500
  General water Consumption            8T/day
  Voltage              220/240/380/440V
  Simple block machine line area needed
  Workshop            200m2
  Office          100m2
  Total area          About 2000m2
  Worker arrangement
  operate          1
  Material loader        1
  Drive forklift                1
  Feeding pallets        1
  Maintain      1
  Total              5
 
block making machine QT6-15 capacity
  Size(L x W x H)          Pcs /Mould          Pcs / Hr
  400X100X200                    12                        2160-2880
  400X150X200                      8                        1440-1920
  400X200X200                      6                        1080-1440
  400X250X200                      4                              720-960