LED Silicone Package Material AP-G1550A/B
1, Indroduction:
AP-G1550A/B is double component, heat-curing silicone gel material, uses for LED packaging fill. After curing,it has high-light transmittance, good heat-stability, small stress,and low hygroscopicity etc..
AP-G1550A/B is double component, heat-curing silicone gel material, uses for LED packaging fill. After curing,it has high-light transmittance, good heat-stability, small stress,and low hygroscopicity etc..
2, Technical parameter:
Item Technical parameter Before curing(A component) Appearance Colourless transparent liquid Viscosity mPa•s(25℃) 2000 Before curing(B component) Appearance Colourless transparent liquid Viscosity mPa•s(25℃) 2000 Mix ratio 1: 1 Mix-Viscosity mPa•s(25℃) 2000 Typical curing condition 100℃×1h After curing Appearance High transparent silicone gel Refractive(25℃) 1.53 Transmittance(％, 450 nm) ﹥95
Item Technical parameter Before curing(A component) Appearance Colourless transparent liquid Viscosity mPa•s(25℃) 2000 Before curing(B component) Appearance Colourless transparent liquid Viscosity mPa•s(25℃) 2000 Mix ratio 1: 1 Mix-Viscosity mPa•s(25℃) 2000 Typical curing condition 100℃×1h After curing Appearance High transparent silicone gel Refractive(25℃) 1.53 Transmittance(％, 450 nm) ﹥95
3, Usage:
A:B=1: 1, we suggest to use the planetary mixer to mix the A&B component, mixed prior to application ,and can only be used after you remove the bubble in the condition of 10mmHg vacuum under 60℃. Please operater in dry and clear enviroment.
A:B=1: 1, we suggest to use the planetary mixer to mix the A&B component, mixed prior to application ,and can only be used after you remove the bubble in the condition of 10mmHg vacuum under 60℃. Please operater in dry and clear enviroment.
4, Attentions:
Some of materials,chemical,curing agent,plasticizer can control the gel material’s curing.There are are including:
1, organotin and other metallorganic compound
2, sulphur, polysulfide, polysulfone and other sulfur-containing
3, amine, polyester rubber and other ammoniac
4, phosphorig and other phosphorig-containing
5, Some flux residues If any doubt that whether some kind of material would restrain the curing, we suggest a compatibility experiment test for the suitability. If the uncured packaging materials exist the surface of the curing ones,then the curing incompatible, restrain curing.
Some of materials,chemical,curing agent,plasticizer can control the gel material’s curing.There are are including:
1, organotin and other metallorganic compound
2, sulphur, polysulfide, polysulfone and other sulfur-containing
3, amine, polyester rubber and other ammoniac
4, phosphorig and other phosphorig-containing
5, Some flux residues If any doubt that whether some kind of material would restrain the curing, we suggest a compatibility experiment test for the suitability. If the uncured packaging materials exist the surface of the curing ones,then the curing incompatible, restrain curing.